Support and General Use > Hardware

Ipod Video 30gb cf

<< < (2/3) > >>

gustan:
@Soap
After doing some research, I found this site:http://www.tarkan.info/20080702/tutorials/iflash-and-rockbox
The reason for me wanting to have loader2 is to load linux and rockbox together as well as the original apple shizz.
@Lurk
You are right on man. I opened it up, and its a Adata 16 gigger. I'm gonna try a 16 gb Ridata 233x. Thanks for informing me though!

So I changed cf, installed Rockbox and works like a charm. Thanks a bunch to all who helped

LambdaCalculus:
Regarding this matter, the first card I tried using was an A-Data Speedy 4GB card (that's all I had at the time). The card worked fine in the OF, but Rockbox threw up an ATA -1 error on startup. I had to use a dirty, kludgely hack to get Rockbox to work: commenting out line 320 of firmware/target/arm/system-pp502x.c got Rockbox to run, but with unusual effects (no album art, buffer behavior was wonky, etc.) The Transcend 133x 32GB card that's in my video now works without needing this kludge.

I had previously put a CF card into a 2nd gen iPod mini (A-Data Speedy 16GB), and that worked with Rockbox right out of the box. I figure that slower cards are better meant for DAPs that use microdrives for storage, and faster cards are needed for DAPs using larger 1.8" drives.

Chronon:

--- Quote from: LambdaCalculus379 on January 03, 2009, 09:04:16 AM ---I had previously put a CF card into a 2nd gen iPod mini (A-Data Speedy 16GB), and that worked with Rockbox right out of the box. I figure that slower cards are better meant for DAPs that use microdrives for storage, and faster cards are needed for DAPs using larger 1.8" drives.

--- End quote ---
A timing issue, maybe?

dreamlayers:

--- Quote from: LambdaCalculus379 on January 03, 2009, 09:04:16 AM ---Regarding this matter, the first card I tried using was an A-Data Speedy 4GB card (that's all I had at the time). The card worked fine in the OF, but Rockbox threw up an ATA -1 error on startup. I had to use a dirty, kludgely hack to get Rockbox to work: commenting out line 320 of firmware/target/arm/system-pp502x.c got Rockbox to run, but with unusual effects (no album art, buffer behavior was wonky, etc.) The Transcend 133x 32GB card that's in my video now works without needing this kludge.
--- End quote ---
Do you really mean you commented out the DEV_EN line?  Could it have been the DEV_RS line instead?

I have some other ideas regarding what might help (eg. trying a lower PIO mode) but I don't have the hardware to test with.

LurkAzusa:
I'm willing try any tests you may have for an ipod 4G with a 16 Gb AData.  It is the DEV_RS that I comment out.  After that  I could put it in my Video for testing, as well.

Navigation

[0] Message Index

[#] Next page

[*] Previous page