Picture Flow Plugin Patch

[Till]

Hi Guys! I want to install a patch for picture flow plugin. What i need to do than that work?

[karashata]

In order to install a patch, you need to apply the patch to the source code.  What you need to do is download the source code either from the download site, or by checking it out via Subversion (instructions on how to do so are here.).  To apply the patch, you need to download it, put it in the source code folder, and use the command "patch -p0 -i <file>".  (Further instructions can be found here.)  In order to compile the source code into a working firmware, you'll need to set up a build environment and compile the appropriate firmware (instructions here, here, here, and here.)

I hope this helps.

[Till]

Oh that's really hard for me  but i try. i just want that the image in size 200x200 will be display on center. It is moving upper because of album title and mirrored image in down. how to fix it?

[karashata]

I don't think there's much you can do about that, that's how the plugin was written...  However, you could try changing the zoom to something like 50% so the image is smaller and doesn't sit right up against the top of the screen.  Of course, this means the image will be smaller (for 50%, it'll be 100x100 pixels), but it should appear to be more centered.

[Till]

Yep, but it will be sooo pixely  Anyway thanks for help for attaching pathces link in soure code.

[karashata]

Uh... You're welcome, I guess.

I do what I can to help whenever possible.