Installation / Removal > Sandisk - Installation/Removal

C250 USB problem

(1/2) > >>

hulkster:
installed rockbox
starts up fine and plays music radio etc but when i plug the USB cable in i get a dos like screen with some lines of script saying connecting etc but noticed a couple of error messages some of which have CRC in front of them. I then get a hardware failure prompt within windows saying USb disconnected malfunctioned etc.

Did a manual install of rockbox. Couldn't install bootloader using "Sansapatcher" b/c it said it failed to extract the file or something, so used the automated install utlity and specifically the second tab which allows to install the bootloader.

the unit worked fine out of the box

saratoga:
There is no USB mode in rockbox so you need to use the retail firmware.

hulkster:
so basically i need to hold the left button down and power (to boot into the original firmware) to do my transferring etc

what a bummer

i read somewhere that the device would be readable under the rockbox system which is why i tried to connect whilst in the rockbox menu

saratoga:

--- Quote from: hulkster on October 29, 2008, 09:25:36 PM ---i read somewhere that the device would be readable under the rockbox system which is why i tried to connect whilst in the rockbox menu

--- End quote ---

Link it so we can get it corrected.

eevan:

--- Quote from: hulkster on October 29, 2008, 09:25:36 PM ---so basically i need to hold the left button down and power (to boot into the original firmware) to do my transferring etc
--- End quote ---
No. When the player is turned off, connect the cable, and it will automatically boot into the OF.

Navigation

[0] Message Index

[#] Next page