Installation / Removal > Sandisk - Installation/Removal

e200 Bricked / Manufacturing Mode

(1/1)

ilya281:
In  Manufacturing Mode mode get to the point when Windows is detecting the e200 manufacturer mode and I'm not sure what exactly to do next . Shall I let Windows install software automatically or what ?That part is confusing.

"Once inside manufacturing mode, use the following command to copy and load the original bootloader to the device:
e200tool recover  BL_SD_boardSupportSD.rom"

P.S Recovery is not working anymore.It is not restoring original firmware anymore.

linuxstb:
I'm assuming you're following the instructions on this page - as the quote you posted is from here:

http://www.rockbox.org/twiki/bin/view/Main/SansaE200Unbrick

A few paragraphs above the paragraph you posted is the following:

"The e200tool works fine under Linux, *BSD and Mac OS X or similar systems, as long as you have libusb installed. If you are a Windows user, you should consider booting from a Linux Live-CD, as getting e200tool to work under Windows is extremely difficult and not recommended."

i.e. you can't use e200tool under Windows - you need to run a Unix-like operating system, such as Linux or OS X.  As the instructions say, an options for Windows users is a Linux Live-CD.

Navigation

[0] Message Index