Rockbox Development > New Ports
Ingenic Jz4740/Jz4732 players
no1be4me:
--- Quote from: mcuelenaere on February 28, 2009, 09:53:10 AM ---
--- Quote from: cluex on February 28, 2009, 09:22:49 AM --- :o
I'm so happy that my onda vx747 clone mp4 player which I have had for almost a year has got rockbox port. Though it's not completed n fully supported yet, but it really rocks. Thank to Rockbox n the developers especially to mcuelenaere.
BTW, I can't help with the programming, but I can inform that my Mp4 Player is "Simbadda Deo Vision 3.0" which is an onda vx747 clone. It works perfectly with custom VX747 BBE Audio firmware from mp4nation. This player is available in Indonesia. I don't know in the other countries. So I guess later when the port is fully supported, Simbadda's owner can try it as well.
The current firmware shipped with my simbadda player sucks. So I hope this rockbox port will be supported soon.
I also haven't tried to compile the SVN code since I don't know how. Any chance giving me the compiled version ??? ;D
--- End quote ---
See this link.
Extract it to the root of a SD card and copy .rockbox/rockbox.bin as onda.bin (for usbtool, see OndaVX747 wiki for more info).
All Onda VX747-related devices/clones (and VX747+, VX777, VX757(?), perhaps more) should be supported with this build.
Other ChinaChip devices (like VX767, Ainol V2000SE, ...) shouldn't require much porting as the basis has already been done.
--- Quote ---Is this port suspended coz I don't see any further post in this forum?
--- End quote ---
No, the forum thread just doesn't really reflect the port status of the Onda VX747.
--- Quote ---Any chance this port would be fully supported in the next Rockbox 3.2 ? Correct me if I'm wrong.
--- End quote ---
Probably not.
--- End quote ---
I downloaded the link for the sd files. See this link. I extracted them to a fat16 sd card.
I found no onda.bin in the download. So I renamed bootloader2.bin to onda.bin
I complied usbtool now when I type sudo ./usbtool 10 the computer screen says success but the 747 does not load rockbox. What am I missing?
Also sorry to ask in this thread.I did not know where else to ask.
Any way thanks for any advice in advance
mcuelenaere:
--- Quote from: no1be4me on March 12, 2009, 11:49:06 AM ---I downloaded the link for the sd files. See this link. I extracted them to a fat16 sd card.
--- End quote ---
Rockbox isn't compiled with FAT16 support by default, so you'll need to either compile it yourself or reformat it to FAT32.
--- Quote ---I found no onda.bin in the download. So I renamed bootloader2.bin to onda.bin
I complied usbtool now when I type sudo ./usbtool 10 the computer screen says success but the 747 does not load rockbox. What am I missing?
Also sorry to ask in this thread.I did not know where else to ask.
Any way thanks for any advice in advance
--- End quote ---
I'm not sure where you got bootloader2.bin from, but if it's the Rockbox bootloader you'll need to hold down a button (not the volume up) to display debug information.
But I would rather advice you to rename rockbox.bin as onda.bin - as this will also work - and you don't need to have a bootloader if you use usbtool.
edit: oh and Onda VX747 is now in the build table, so you can get the most recent version here
no1be4me:
--- Quote from: mcuelenaere on March 12, 2009, 11:55:26 AM ---
--- Quote from: no1be4me on March 12, 2009, 11:49:06 AM ---I downloaded the link for the sd files. See this link. I extracted them to a fat16 sd card.
--- End quote ---
Rockbox isn't compiled with FAT16 support by default, so you'll need to either compile it yourself or reformat it to FAT32.
--- Quote ---I found no onda.bin in the download. So I renamed bootloader2.bin to onda.bin
I complied usbtool now when I type sudo ./usbtool 10 the computer screen says success but the 747 does not load rockbox. What am I missing?
Also sorry to ask in this thread.I did not know where else to ask.
Any way thanks for any advice in advance
--- End quote ---
I'm not sure where you got bootloader2.bin from, but if it's the Rockbox bootloader you'll need to hold down a button (not the volume up) to display debug information.
But I would rather advice you to rename rockbox.bin as onda.bin - as this will also work - and you don't need to have a bootloader if you use usbtool.
edit: oh and Onda VX747 is now in the build table, so you can get the most recent version here
--- End quote ---
wow that was fast. I was going to edit my post to say I used second_bootloader.bin as onda.bin
Ok I'll reformat card to fat32. Where do I find onda.bin Rockbox.bin is not in the download link you provided. And you mean hold down the m button while I do ./usbtool 10 ?
Thanks in advance again
mcuelenaere:
--- Quote from: no1be4me on March 12, 2009, 12:01:26 PM ---wow that was fast. I was going to edit my post to say I used second_bootloader.bin as onda.bin
Ok I'll reformat card to fat32.
--- End quote ---
Can't recall any file named second_bootloader.bin
--- Quote ---Where do I find onda.bin? Rockbox.bin is not in the download link you provided.
--- End quote ---
It's in the zip: /.rockbox/rockbox.bin
--- Quote ---And you mean hold down the m button while I do ./usbtool 10 ?
Thanks in advance again
--- End quote ---
Yes, you'll need to hold down the the M button (or the - ) if you're trying to load the bootloader and would like to see the debug information (which is likely just going to say it can't find .rockbox/rockbox.bin on the microSD).
If you're going to upload 'normal' Rockbox this won't do anything, and Rockbox will power on the LCD anyway.
no1be4me:
--- Quote from: mcuelenaere on March 12, 2009, 12:06:02 PM ---
--- Quote from: no1be4me on March 12, 2009, 12:01:26 PM ---wow that was fast. I was going to edit my post to say I used second_bootloader.bin as onda.bin
Ok I'll reformat card to fat32.
--- End quote ---
Can't recall any file named second_bootloader.bin
--- Quote ---Where do I find onda.bin? Rockbox.bin is not in the download link you provided.
--- End quote ---
It's in the zip: /.rockbox/rockbox.bin
--- Quote ---And you mean hold down the m button while I do ./usbtool 10 ?
Thanks in advance again
--- End quote ---
Yes, you'll need to hold down the the M button (or the - ) if you're trying to load the bootloader and would like to see the debug information (which is likely just going to say it can't find .rockbox/rockbox.bin on the microSD).
If you're going to upload 'normal' Rockbox this won't do anything, and Rockbox will power on the LCD anyway.
--- End quote ---
All right sorry to have bothered you. I downloaded that zip file 3 times there is no rockbock.bin I saw a rockbox747 file.
I was able to load the qutopia linux thing. I thought this would be easy.
The instructions are a little to vague. Not everyone has compiling experience In your instructions you say Download usbtool from SVN and read the README. Well you also have to download some other files from there and you do not mention that. Can you check your zip file and make sure you did not leave out the rockbox.bin see attached picture. Screen shot of the zip file opened. Please have a look!
http://www.mediafire.com/imgbnc.php/9eddaf23799be5126eabfa8730c74a705g.jpg
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version