Rockbox Development > New Ports

Ingenic Jz4740/Jz4732 players

<< < (22/37) > >>

Gametot:
Hello mcuelenaere

I'm not, I hope you can help me.
I have rockbox for the VX747 + Compiling.
Have it on the microSD card copied.
But what should I do the manual leads me nowhere.
I got the firmware 1.0 from vx747p downloaded.
And what should I do now?

Thanks

no1be4me:
How to upload the Rockbox bootloader to NAND

Compile the bootloader
Download the Original Firmware (OF) package (called VX747.HXF or SG301.HXF; vx777.HXF for the VX777)
Compile HXFreplace in utils/jz4740_utils/ (read the README)
Run ../utils/jz4740_utils/HXFreplace VX747.HXF output.HXF ccpmp.bin in the dir where you compiled your bootloader
Put output.HXF in the root of the NAND drive (boot into the OF as Rockbox currently can't access the NAND storage) and name it SG301.HXF (or VX747.HXF on some targets)
Reset your player while holding VOL DOWN (on the VX777 you don't need to hold any buttons)
If you want to have dual-boot capabilities:

Run HXFsplit VX747.HXF output/ and copy output/ccpmp.bin to the root of your SD card
(The bootloader will boot into the OF (loaded from ccpmp.bin from the SD card) when you switch the HOLD switch on, it will boot into an USB mode when pressing VOL UP and if nothing is pressed it will boot Rockbox from the SD)

Gametot:
   
   
If I HXFreplace compile the following error message


--- Quote ---daniel@linux:~/jz_xloader/jz4740$ make
mipsel-linux-gcc -D__ASSEMBLY__ -O2 -G 0 -mno-abicalls -fno-pic -mips32 -I../include -I../boards/onda_vx747 -c start.S -o start.o
make: mipsel-linux-gcc: Kommando nicht gefunden
make: *** [start.o] Fehler 127
daniel@linux:~/jz_xloader/jz4740$

--- End quote ---

no1be4me:
@Gametot here is HXFreplace compiled. http://www.mediafire.com/download.php?hbza2njkkm2

@mcuelenaere
A patch for RockboxUtility support is on the patch tracker atm.

How would one use the above mentioned patch?
It's a diff file. Do I recompile the utility? Sorry that I'm confused
Thanks in advance for your response  ;)

Gametot:

--- Quote from: no1be4me on July 31, 2009, 09:01:45 AM ---@Gametot here is HXFreplace compiled. http://www.mediafire.com/download.php?hbza2njkkm2

@mcuelenaere
A patch for RockboxUtility support is on the patch tracker atm.

How would one use the above mentioned patch?
It's a diff file. Do I recompile the utility? Sorry that I'm confused
Thanks in advance for your response  ;)

--- End quote ---

Thanks

It runs but, unfortunately, I have these weird graphics bugs. I can see nothing but music he plays.
I can now make no photo

an example I can see the main menu 5 times in a row.

i have onda vx747+

Navigation

[0] Message Index

[#] Next page

[*] Previous page