Installation / Removal > Sandisk - Installation/Removal

Sansa C250 - "Load main image fail - switch to Recovery"

<< < (2/3) > >>

DoctorCheesius:
Oh, thank you thank you, I found the correct version on the site you linked me to, put both mi4 and rom files on it for americas, and it worked. THANK YOU. Next step - install rockbox again, but in the meantime, it's not a brick, and I thank you. (It's too small to be an adequate brick, anyway)

*EDIT*
And, just FYI, the install of rockbox went smoothly this time, so I am once again happy with my mp3 player, not just relatively satisfied.

bertrik:
There's a fix in the SVN archive now to allow rockbox to be installed on sansa c2xx with original firmware 01.01.07. This fix will probably be included in the next version of sansapatcher and the next version of rbutilqt after m1.0.6. I made a list of rockbox-compatible original firmware versions at http://www.rockbox.org/twiki/bin/view/Main/SansaC200Port

robin0800:
bertrik
01.01.05 & 01.01.06 Do both have an MSC mode.
What they don't have is a USB setting screen to allow you to select it.
This is why my method, is important, as detailed in the wiki page as this is the only way to get into it.
It is good to note that 01.01.07 has restored the USB setting screen.

JEJ:
Since I updated to .07 now I want to downdate to .06. At a link provided here I found there are:

    SansaC200A1_01_06.7z    
     SansaC200E1_01_06.7z    
     SansaC200F1_01_06.7z    
     SansaC200G1_01_06.7z    
     SansaC200H1_01_06.7z    
     SansaC200J1_01_06.7z
     SansaC200P1_01_06.7z

How do I know which one to use?

bertrik:
The alphabetical codes (A, E, etc) indicate a geographical region. I think A is USA and E is Europe, I don't know the exact regions for the other codes (J=Japan?). As far as I know, the A firmware allows you the use the radio, while the E firmware does not.

By the way, if I were you, I'd install the older 01.01.00 instead of .05 or .06, so you don't have to resort to button tricks or extra plug/unplug actions to access the device in MSC mode. If you are able to build sansapatcher or rbutil from source code, I recommend upgrading to 01.01.07.

Navigation

[0] Message Index

[#] Next page

[*] Previous page