Support and General Use > Hardware

e260r Load error!

<< < (2/3) > >>

MarcGuay:
Okay, I'm not sure (I don't own a R model and have never done the installation or recovery), but you might want to just return your player to it's original state by following the instructions here:

http://www.rockbox.org/twiki/bin/view/Main/SansaE200Unbrick#Recovery_Mode

Please heed the warnings and only copy a valid mi4 file to the drive.

P.S. If you search the forums for "load main image failed", you'll find other people who've been in the same situation as you, and who have been guided out of it.  It seems that it's possible you don't have a genuine rhapsody model.

P.S. Part II - You never have to remove the battery, holding down the power/menu button will eventually turn the player off.  More useful information can be found here:  http://www.rockbox.org/twiki/bin/view/Main/SansaFAQ

yalcrelyt:
I have tried everything on that page except the one with the bootloader! I can't find the bootloader for it though. Did I mention I formatted in recovery mode?

MarcGuay:
So you copied a Rhapsody .mi4 file to the player while in recovery mode and rebooted?  What happened?  Did you read the other forums posts?  Did you try recovering using a regular e200 .mi4 file, given the chance that you don't have a real Rhapsody model? 

yalcrelyt:
I have put a sansa.fmt file and a .mI4 file on there so many times! They are e260r files. I know because I got them from Sansa. I think the problem is me formatting 16 Format while in recovery mode from my computer.

MarcGuay:
No, that should be fine.  I think the problem is that you have a regular e200 and not a Rhapsody series (read the other threads, it seems to be what generally causes this error).  Try putting JUST a regular e200 mi4 file on the 16MB recovery partition, or wait for someone with more experience to come along and help you.

Navigation

[0] Message Index

[#] Next page

[*] Previous page