Rockbox Development > New Ports
Philips Gogear SA9200
LambdaCalculus:
b0hoon: Confirmed, straight from Philips: http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=SA9100/05&scy=gb&slg=en
So that means that technically, we basically can use Rockbox on the entire SA9x00 lineup.
jaylee:
I've tried, current SA9200 port works well on my SA9400.
I've seen some SA9210/SA9410 (sa9200 or sa9400+FM radio), but I didn't purchase any. They may be out of stock now.
LambdaCalculus:
Thanks for that bit of information. I've seen some SA9210 units on occasion when I browse eBay, but never thought of buying one. If I see another one again, I'll buy it and pop it open to see what the FM radio hardware is.
The SA9x00 series works well enough now that we should be able to start working in an install process into Rockbox Utility for it.
b0hoon:
--- Quote from: LambdaCalculus379 on October 18, 2010, 03:06:57 PM ---b0hoon: Confirmed, straight from Philips: http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=SA9100/05&scy=gb&slg=en
So that means that technically, we basically can use Rockbox on the entire SA9x00 lineup.
--- End quote ---
Well, a bit off-topic but i'm wondering about the names of the other Gogear series and i think it is messy. For example: we have the Gogear 1630. But it can be without the radio, so there are models: 1420, 1620, 1820 (second number is the size of the drive). Models with the radio have 3 instead of 2 on the third position, so we have: 1430 (may not exist), 1630, 1830 (may not exist). There is also 1635, but closely unknown. The Gogear HDD6330 can be without the radio too (HDD6320). So instead of the text on the main page "Philips GoGear HDD1600, HDD1800, HDD6300 and SA9200" should be something like "Philips GoGear HDD1000 series, Gogear HDD6300 series and Gogear SA9000 series" (IMO). Not to mention that the Wiki page is in a mess.
LambdaCalculus:
Here are the last few obstacles in our way before the port can even be considered promoted from "Unusable" status:
* Add in missing artwork for plugins that don't have artwork for the 128x160 screen resolution
* Enable plugins
* Find out if there is another way of getting the bootloader installed; the instructions on the wiki can be rather daunting for users, and may also pose a problem when we need to install with Rockbox Utility
* Add installation support into Rockbox Utility
Since the current installation method requires one to put the SA9x00 into recovery mode first, then follow a good number of steps, this should be priority one.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version