Support and General Use > Hardware

*PANIC* ATA: - 71 what does it means

<< < (3/3)

petur:
afaik there is a daughterboard that hosts the usb and IDE and sometimes suffers broken solderings on the connection to the main board.

broken solderings are fairly easy to spot, touch it with a (fine) solder iron to reflow the solder

NuJew:
mine is

GPIO_READ D81A7888
GPIO_OUT: 00080888
GPIO_FUNC: B1ED1AC8
GPIO_ENA: B1ED0AC8
GPIO1_READ: 079A7660 changes back and forth to 079A6660 <-- Different
GPIO1_OUT: 010A4008
GPIO1_FUNC: 019E60EE
GPIO1_ENA: 010E400C
ADC_BUTTONS: FF
ADC_REMOTE: FF
ADC_REMOTEDETECT: E2
Batt: 4.066V 88% <--- Different
remotetype: 0



--- Quote ---afaik there is a daughterboard that hosts the usb and IDE and sometimes suffers broken solderings on the connection to the main board.

broken solderings are fairly easy to spot, touch it with a (fine) solder iron to reflow the solder
   
--- End quote ---

any picture for newbies?

RenatoN:
I found a couple of suggestions on misticriver to resolve this.  A couple of pictures too.

http://www.misticriver.net/forums/iriver-h1xx-series/45641-temp-fix-always-connected-hdd-check-error-pics.html

I really couldn't see any broken solder connections.  If I can't find anyone handy with a soldering iron I might give it a try myself.

Renato

Navigation

[0] Message Index

[*] Previous page