Thank You for your continued support and contributions!
im assuming i have a US version, i got it from a guy in california. how do you tell? but continuing on assuming it is a US version: i dont know exactly what the DRM is but i know thats used with the media port and is not necessary for recording or data transfer or anything like that...right? so its not a big deal if i permanently remove the DRM support from the player...right?
so then it has a list of different links to the bootloader for the h3xx:H320 and H340 INT 1.28k H320 and H340 INT 1.28eu H320 and H340 INT 1.29k H320 and H340 INT 1.30eu H320 and H340 INT 1.29j which should i download?
but i see on this site: http://download.rockbox.org/manual/rockbox-h300/rockbox-buildch2.html#x4-60002 it says: "If you wish to install Rockbox on a US Iriver H320 and H340, you must first install a non-US version of the original firmware and then install one of the supported versions patched with the Rockbox bootloader." - a non-US version of the original firmware...so thats the build right? so should i not use the build i said i downloaded above?
oh and do i need to install fonts? or is it just something you can do but its not necessary?
If you have a US player, should first update to one of the non-US firmwares listed above, and THEN follow the instructions to patch the firmware with the Rockbox bootloader and flash it to your player.
but i thought those i just listed were the bootloaders. or am i mixing them up?
i patched the H300.hex file with the fwpatcher. it said it was successful. i move that onto the root directory of my iriver along with all the stuff in the build. so i have the .rockbox folder and the now patched H300.hex file. but i see no change when i load up the unit. i know you said i have to "flash" the non-US firmware (the .hex file) and THEN patch it. so did i skip a step? i followed the steps as given here: http://www.rockbox.org/twiki/bin/view/Main/ManualRockboxInstall#Installing_a_Rockbox_daily_build
Quote from: DisturbedPyro on March 18, 2008, 10:28:23 PMi patched the H300.hex file with the fwpatcher. it said it was successful. i move that onto the root directory of my iriver along with all the stuff in the build. so i have the .rockbox folder and the now patched H300.hex file. but i see no change when i load up the unit. i know you said i have to "flash" the non-US firmware (the .hex file) and THEN patch it. so did i skip a step? i followed the steps as given here: http://www.rockbox.org/twiki/bin/view/Main/ManualRockboxInstall#Installing_a_Rockbox_daily_buildThose steps tell you how to install Rockbox once you have installed the bootloader. You haven't yet managed to install the bootloader, so you have to go back to the previous chapter in the manual:http://www.rockbox.org/twiki/bin/view/Main/ManualRockboxInstall#Installing_the_Rockbox_bootloadeHint: See step 10.
And yes, I am an idiot that linked to the wrong manual.
Actually, it looks like MarcGuay revised that wiki page today as part of his wiki clean-up, so maybe you're not a total idiot. Â
Page created in 0.091 seconds with 21 queries.