Installation / Removal > Sandisk - Installation/Removal

have to eject memory card for RB to boot

(1/8) > >>

lewislink:
I hoping someone can help me resolve an issue I'm having with RB on an e250. I'm using a 4GB MicroSDHC and RB won't boot with it plugged in. I have to eject the card, boot into RB and then plug the card back in. RB will use the card after this procedure. I dont need to do this win a 2GB card.

Is there something I can do to fix this? The socket is sprung loaded and if I were to use it the way described above I run the risk of the card flying out and as small as it is I'd never find it.

Thanks

MarcGuay:
Try #2.  Read this please:

http://www.rockbox.org/twiki/bin/view/Main/SansaFAQ

lewislink:

--- Quote from: MarcGuay on February 20, 2008, 02:44:11 PM ---Try #2.  Read this please:

http://www.rockbox.org/twiki/bin/view/Main/SansaFAQ

--- End quote ---

I read that but it didn't talk about the issue stated in this thread. It says RB will support up 32GB MicroSDHC cards. I'm using a 4GB MicroSDHC card. According to that info there shouldn't be a problem but there is.

Llorean:
Try describing more thoroughly what happens. We can't help you without more information, and you're the only person reporting this problem.

MarcGuay:
If you'd read the whole page or even just searched it for "micro" you would have found this:

I'm having USB Connection/Charging Problems, help?
 If you have a microSD card in your player you must either remove the card on USB plug-in (you can insert it after connecting to write data to the card as long as it's not a SDHC) or boot the original firmware manually first and then connect to USB.

---

Extra 1:  This won't be an issue when USB support is implemented.
Extra 2:  Are you sure the same thing doesn't happen with the regular microSD card?

Navigation

[0] Message Index

[#] Next page