Installation / Removal > Sandisk - Installation/Removal

Bricked my e260 - HELP! (Resolved -- SUCCESS~thx)

(1/2) > >>

AndrewP:
(It's what I get after getting cocky with reflashing an older motorola phone (and bricking my wife's older MP3 player)

I tried to install RockBox on my newly purchased refurn e260.  I used the automatic installation, I skipped the bootloader installation (cause it said mine was fine) and I installed a bunch of stuff (themes and such), but it would not boot RockBox, it would only go to Sansa Stock firmware.  Instead manually installing the RockBox bootloader - I --> looked at manual installation and decided to follow the steps for the e200R (because I thought my installation CD came with Rhapsody installation).  

So I followed the http://www.rockbox.org/twiki/bin/view/Main/SansaE200RInstallation and I went through step one (without seeing Firmware Unlocked, Proceed to Step 2 prompt) and I did step two (pp5022.mi4 into root directory in manufacturer's mode and put OM.mi4 into system directory).  It rebooted and that's all she wrote.  

Tried to reformat with sansa.fmt in recovery mode, but all it does is display the Sansa logo.  So now I don't have
1) e200tool (nm that I don't know how to use it)
2) don't run linux

Help.  I don't know where to go from here.  I was so focused on trying to play OGG files on my mp3 player, that I bricked it becasue of dumb mistakes.

Any pointers would be appreciated.  I think my bootloader is shot.  Anyway I can reinstall the firmware?

Thanks.

-A

zajacattack:
If you cannot enter recovery mode, you will have to use e200tool to restore the bootloader and firmware.

AndrewP:
Actually, I CAN enter the recovery mode, it's just when I format the device, I get the long intro screen and nothing happens.  Can I somehow reinstall the firmware when I'm in the recovery mode?

Thanx

saratoga:
Yes:

http://www.rockbox.org/twiki/bin/view/Main/SansaE200Unbrick

AndrewP:
Where do I get the basic Sansa Firmware from ?

I found:
http://daniel.haxx.se/sansa/mi4.html

with a bunch of .mi4 files, do I just place them in the root directory of the recovery drive? Or do I have to rename them to pp5022.mi4 and THEN place them in the root directory?

Thanx.

Navigation

[0] Message Index

[#] Next page