Support and General Use > Hardware

iRiver H120 CF Mod Attempt - Success!

<< < (12/16) > >>

PouncePony:

--- Quote from: scharkalvin on February 04, 2008, 02:54:10 PM ---Did you recompile rockbox with the patch to ata.c to remove the reset?

--- End quote ---

No, I did not.  I've been using it for about a week and for the first time I had a couple of freeze ups.  I wouldn't guess it had to do with the ata.c sleep issue.  Information provided on the A-Data card states "Fully compatible with PC Card ATA specification"

Maybe this negates the requirement for the patch ??

Pony

davidc:
Sorry to be a pain about this but just want to make sure I get the right one!

Had another look round that site, and think that this :-

http://linitx.com/viewproduct.php?prodid=11861

is the one that I need to get, yes or no?

Also with the lower capacity cards does it matter which brand/make to use?  Was thinking about getting a cheap inexpensive one first (typically compact flash is the one type of brand that I don't have lying around the house!) to make sure that it all works before getting a bigger capacity card.

Cheers.

PS Can someone confirm that there is no soldering involved in this project before I begin please?  It'd be the one thing to put a stop on it!

scharkalvin:

--- Quote ---is the one that I need to get, yes or no?
--- End quote ---
No image on the site for that one, can't tell.  If it is a 50pin male hdd connector, then
it should be correct.


--- Quote ---Also with the lower capacity cards does it matter which brand/make to use?
--- End quote ---
Many of the smaller CF cards were not IDE compatible.  I'd avoid anything smaller than 4gb, though some reported success with 512mb through 2gb cards.

larry_llama:

--- Quote from: davidc on February 05, 2008, 05:30:08 PM ---Sorry to be a pain about this but just want to make sure I get the right one!

Had another look round that site, and think that this :-

http://linitx.com/viewproduct.php?prodid=11861


--- End quote ---

Hard to say.. but I'm sure this one is right, and it's cheaper - and supposedly free shipping with no minimum order. I don't know how they do it but my roommate ordered from them before and they shipped free to Canada from I guess China:
http://www.dealextreme.com/details.dx/sku.10886~r.95998535

Jeff:
I'm cross posting this in hopes of a LOT of assistance.


Just purchased and received this adapter: (as mentioned above)

http://linitx.com/viewproduct.php?prodid=11861


and this CF Card: (Transcend 32GB 133X)

http://www.newegg.com/Product/Product.aspx?Item=N82E16820208389&Tpk=CF

Was able to format the card and load content onto it including .rockbox.

When booting the player I get the first two lines and then the following:

ATA error:  -80


Any suggestions or assistance would be GREATLY appreciated.  If I need to modify the ata.c code then i'll need MAJOR help as I don't even know what it is or where it is.


Jeff

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version