Welcome to the Rockbox Technical Forums!
If you don't know how to change it (you need to modify the PLLA setting!) I'll try to come with a patch tomorrow.
with dd as so:sudo dd if=myfile.txt of=/dev/sdc bs=512 seek=8026112
+ _DEBUG_PRINTF("DIR0: %x DIR4: %x", *(buf2+512), *(buf2+512+4));
+ int *wordbuf = (int*) buf2;+ _DEBUG_PRINTF("DIR0: %x DIR4: %x", wordbuf[512/4 - 1], wordbuf[512/4]);
I postedFS# 10219 for my debugclocks patch. Scrolling is a bit beyond me right now but I did put some paging into it that should work for a clip. See what you think.
+ sd_read_sectors(0, 0x7A7800 - 1, 2, buf2);
+ sd_read_sectors(0, 0x7A7800 - 0xF000 - 1, 2, buf2);
Quote from: saratoga on May 18, 2009, 05:49:49 PMwith dd as so:sudo dd if=myfile.txt of=/dev/sdc bs=512 seek=8026112The seek= option must be 7964671 (0x7A7800 minus 1 minus OF size)
The debugclocks info is in svn now but the info displayed is static, ie whatever the state of the frequencies was when the page was displayed will not change for current conditions. This patch will turn the info back to "live" info that will change realtime.
The usae of while(1) is weird too. Why not just button_get instead (without the timeout part)?
In fact I think that's a part of your code from the debug io ports that I copied for that part...
Page created in 0.09 seconds with 21 queries.