Thank You for your continued support and contributions!
I was able to get to the main menu on my e200v2. It is still not very consistent. Sometimes, I get just a white or gray display. If you hold the player at an angle, you can sometimes still see the rockbox logo. After 10 seconds, the backlight goes off. The buttons aren't working yet, but inserting the USB cable will sometimes turn the backlight back on.
I'm starting to wonder if the shared GPIO deal is what maybe causing some of these problems (at least on the e200). The display uses GPIO B & C as do some of the buttons. The button light uses GPIO D which I believe is also used by the storage. If the various functions are not checking the status of these GPIOs, and just reading or writing under the assumption that they are still in the correct state, then who knows what will happen.Any thoughts from the more experienced?
...I don't know if the c200 has an SD slot
Anyone brave enough to take pictures of the wheel/buttons disassembled casing?
They plug into a non-descript ZIF socket on the board via a ribbon cable. It can be clearly seen in image 17 here:http://www.anythingbutipod.com/archives/2008/03/sandisk-sansa-fuze-disassembly.phpIts the plain white connector with 10 pins.
Page created in 0.1 seconds with 21 queries.