Welcome to the Rockbox Technical Forums!
I think it should be the same for all e200v2, since they all use the same firmware. It will probably be different for the fuze.
0: e59ff01c ldr pc, [pc, 0x1c] <- 0x30000044 4: e59ff01c ldr pc, [pc, 0x1c] <- 0x300000bc 8: e59ff01c ldr pc, [pc, 0x1c] <- 0x300000c8 c: e59ff01c ldr pc, [pc, 0x1c] <- 0x300000cc 10: e59ff01c ldr pc, [pc, 0x1c] <- 0x300000d8 14: e59ff01c ldr pc, [pc, 0x1c] <- 0x300000c8 18: e59ff01c ldr pc, [pc, 0x1c] <- 0x300556a0 1c: e59ff01c ldr pc, [pc, 0x1c] <- 0x300556ec 20: deadbeef cdple 14, 10, cr11, cr13, cr15, {7} 24: 30000044 28: 300000bc 2c: 300000c8 30: 300000cc 34: 300000d8 38: 300000c8 3c: 300556a0 40: 300556ec 44: e321f0d3 msr CPSR_cf, 0xd3 48: e3a01000 mov r1, 0x0 4c: e59f2890 ldr r2, [pc, 0x890] <- 0x30000000 50: e59f3890 ldr r3, [pc, 0x890] <- 0x30000044 54: e4920004 ldr r0, [r2], 0x4 58: e4810004 str r0, [r1], 0x4 5c: e1530002 cmp r3, r2 60: 1afffffb bne 0x54 64: e59f2880 ldr r2, [pc, 0x880] <- 0x3007ac40 68: e59f3880 ldr r3, [pc, 0x880] <- 0x3012cd04 6c: e3a04000 mov r4, 0x0 70: e1530002 cmp r3, r2 74: 84824004 strhi r4, [r2], 0x4
for(i=0x30000000; i< 0x30000000+MEM*0x100000; i+=4) *(volatile int*)i = i;for(i=0x30000000; i< 0x30000000+MEM*0x100000; i+=4) if(*(volatile int*)i != i) printf("bad");
@JDGordon : what's the point of a partition table ? It just makes things more complex, and is useless, we don't want to access that part of the SD card.
Quote from: funman on November 10, 2008, 11:54:04 AM@JDGordon : what's the point of a partition table ? It just makes things more complex, and is useless, we don't want to access that part of the SD card.because it wouldnt surprise me if parts of the rockbox fat/disk drivers assume a valid parittion table exsists, and also the sd driver should always read/write to the sector it was asked for, and not silently change it
If anyone succeeds with the fuze build or have an idea why it fails to load, post!
Page created in 0.152 seconds with 21 queries.