Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
Hillshum:
One other thing on the >2gb storage, I have been rolling with the wheel light off quite a bit lately on my e260v2. But It often flashes on once for a sec. When copying files it flickers the whole time. It seems to be tied to reading the NAND or the uSD.
gabe565:
My 8gb Fuze does the same thing. When the wheel light is on, I'm fine, but once I turn it off, it'll flash on file access.
kugel.:
I experience it too...sometimes, the other sometimes it works. I haven't worked out a reliable solution yet (and I do think we have worse problems).
gabe565:
Yeah not being able to read past the first gigabyte needs to be figured out first
FlynDice:
Do we even have nand on the ams sansa's? I know there is a nand interface on the chip but it seems sandisk opted to go with an embedded sd card instead(they are sandisks after all...). My point to that is though that the sd interface uses gpio-d and the button light seems to be turned on with gpio-d[7]. Yes I know the diagram in the datasheet does not show an actual assignment for pin 7 but it would seem that anecdotal evidence suggests that the sd interface is using it for something. Am I misunderstanding something?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version