Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
Rob2222:
@FlynDice/All
Even with running 2.3.31 it wont flash anything other then 2.3.31-Org and 2.3.33-Org. :(
BR Robert
djphatic:
--- Quote from: FlynDice on May 28, 2010, 01:25:10 PM ---It seems V02.03.31A will indeed use a Patched fuzpa.bin though. If you can flash 2.3.31 back onto your player you may be able to use that to flash a patched firmware.
--- End quote ---
So flashing the player back to 02.03.31A you were able to get Rockbox to install? I my firmware version always showed P instead of A e.g. 02.03.31P and it does now even with Rockbox installed.
Rob2222:
@djphatic:
The letter behind the firmware number changes regarding the region setting.
(A=America, F=Europe and P=Pacific (Rest of World)
So you have now 2 Fuze's there, one which accepts patched and older formwares than .31 and one version that only accepts .31 and .33 original, or?
Can you see any difference on these units? Any big difference in the serial number?
Maybe differences in the system files in the root folder?
Could you maybe compare that?
Where you got the working unit from? Was that a new purchase? Meaning a new unit.
BR Robert
mitk:
--- Quote from: Xanikseo on May 28, 2010, 11:42:22 AM ---I've noticed that since r26335 (it may have been introduced earlier) I have to wait for "Refreshing your media" to finish in OF, after whenever I have used Rockbox (even when just switching on rockbox, and powering off again).
Also I can't charge anymore with a wall-charger, without it booting into OF (yes, ok you can hold down select). Surely I should be able to use a wall-charger without booting into OF, since I can't really transfer any data with a wall-charger? Or is it because we don't know how to detect if someone is just using a charger or is in fact connecting to a computer?
--- End quote ---
You noticed this behavior with uSDHC card inserted?
Please take a look at http://www.rockbox.org/tracker/task/11325?project=1&show_task=&order=id&sort=desc.
nissin:
--- Quote from: Rob2222 on May 28, 2010, 02:31:26 PM ---@djphatic:
The letter behind the firmware number changes regarding the region setting.
(A=America, F=Europe and P=Pacific (Rest of World)
So you have now 2 Fuze's there, one which accepts patched and older formwares than .31 and one version that only accepts .31 and .33 original, or?
Can you see any difference on these units? Any big difference in the serial number?
Maybe differences in the system files in the root folder?
Could you maybe compare that?
Where you got the working unit from? Was that a new purchase? Meaning a new unit.
BR Robert
--- End quote ---
I've flash my fuze V2 without any problem.
Here are some details:
Stock firmware version: v02.01.17
The device has updated to v02.03.33P before flashing to rockbox.
Patched firmware transfer to the device using MSC mode.
I did not insert memory card during the flash process.
File size of patched firmware: 15,728,640 Bytes
CRC32: C2B8E669
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version