Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
funman:
--- Quote from: funman on May 19, 2010, 05:43:44 PM ---I have a put a patch for set_cpu_frequency() : FS#11297
--- End quote ---
It doesn't work.
--- Quote from: bor_ka on May 20, 2010, 07:18:13 AM ---And who can edit FS#11267, especially the title and description? Me not.
--- End quote ---
If you have comments related to the ticket please add them on flyspray.
--- Quote from: athatai on May 20, 2010, 08:47:40 AM ---I own a Clip+ and am using 26179 and it looks like the USB charging is broken. I tried it on my PC and the screen blacked out with no music. The wall charger does not seem to work either (same problem).
--- End quote ---
--- Quote from: funman on May 17, 2010, 08:19:17 PM ---If you use a current build with Clip+ it will try to reboot to OF on USB plug, but with current mkamsboot it will fail and power off the Clip+
So you should:
* Reinstall the bootloader (the last bootloader will work) with a mkamsboot build from SVN or wait for a new mkamsboot release.
--- End quote ---
Did you follow these instructions? Charging works fine for me.
athatai:
funman,
Thanks for the suggestion. I'll try that later tonight. I simply did not connect the dots :) Now I understand...
Jennifur:
--- Quote from: csavery on May 18, 2010, 07:12:07 AM ---Updated patch FS#11288 for fixing scroll wheel lockup after 20 minutes.
Should work, please test when you have time. ;D
--- End quote ---
The patch works perfectly. I've yet to have the scroll-wheel freeze now. Thank you so much.
Also, ran the battery bench. Got about the same runtime as the OF.
thor777:
--- Quote from: nViATi on May 15, 2010, 01:30:45 PM ---Does anyone else notice hissing in their Rockboxed C200v2 with sensitive headphones? It's always present, even during playback. The original firmware C200v2 doesn't hiss, and neither did the C200v1 OF or Rockboxed.
--- End quote ---
I'm noticing hiss on my rockbox'd Fuze v2 as well. I'm using RE0s and r26155. This happens whether it's directly connected to Fuze HP or through my Cmoy amp. The hissing starts at around -10db and it's really apparent at 0db. I can get around this by turning up the pre-amp from replay-gain and lowering the volume within Rockbox, so it's not a really big deal for now....but the OF (v02.03.31) does not have any hiss even when I turn the volume to max (on Fuze and/or on amp).
funman:
My clipv2 have much more hiss than my Clip+ and Fuzev2.
Using FS#11297 I noticed that it is different (lasts less longer but happens more often) when the CPU is boosted, and it also seems different with 24MHz or 40MHz CPU clock.
It's absent when listening to FM radio.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version