Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
florin:
Any ideas as why volume is very low? Maximum volume in Rockbox corresponds to ~60% in OF (Rest of the World). 8 GB Clip+. Cleared settings, latest build (r25824). Previously I had 25493 and I didn't have this issue. I could try a more recent build, but I don't know where to get it from.
Regarding SD, I have a 16 GB class 2 Toshiba card and everything seems fine.
marc2003:
--- Quote from: marc2003 on May 04, 2010, 08:27:05 PM ---right, my battery test has just finshed. 14h21m in the end.
sansa clip8gb v2
r25799
ogg q5, 11 track album, avg 143kbps
cpu boosted
volume -14
--- End quote ---
test repeated with back light on: 9h39m
any other tests you want doing, give us a shout. i'm not much use for anything else. :/
Phil2991:
--- Quote from: saratoga on May 05, 2010, 03:23:19 AM ---Anyone feel like trying out this bootloader for the fuzev2:
http://duke.edu/~mgg6/rockbox/bootloader-fuzev2.sansa
If it works I'll get it uploaded to the download server.
--- End quote ---
Saratoga, I am trying to test your bootloader but I am getting the following error when I run mkamsboot to patch OF 2.3.31:
C:\rockbox\Patched_firmware>mkamsboot.exe fuzpa.bin bootloader-fuzev2.sansa rockbox_fuzpa.bin
mkamsboot Version 1.2
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
[ERR] Original firmware unknown, please try an other version. Tested Fuze versi
ons are : 2.01.17, 2.02.26
[ERR] Could not load fuzpa.bin
Is there an updated version of mkamsboot that I should be using to patch the OF?
mc2739:
--- Quote from: cpnfantstk on May 05, 2010, 08:37:37 AM ---I would like to dust off my M240 and install rockbox . Should I use the Clip V1 files to install since I don't see separate files for the M200V4 series?
--- End quote ---
The clipv1 files will not work on an m200v4. The current build for the m200v4 is located here: http://build.rockbox.org/data/rockbox-sansam200v4.zip
--- Quote from: Phil2991 on May 05, 2010, 09:22:52 AM ---... I am getting the following error when I run mkamsboot to patch OF 2.3.31:
--- End quote ---
The 2.03.31 version of the Fuzev2 OF is supported in svn mkamsboot, but not in the released version. Your options are to build the current version of mkasmboot or use an older OF (2.03.17 or 2.03.26) that is supported by the release version of mkamsboot.
ranma:
--- Quote ---03:12 < funman> ranma: is there any markings on the Clip+ battery ?
--- End quote ---
--- Code: ---| BAK 323036P
9F30 1.07Wh
+ 3.7V 290mAh
--- End code ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version