Rockbox Development > New Ports

SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2

<< < (331/386) > >>

izzy84075:
Just flashed my Fuzev2 with the patched .31 OF from a few pages ago and started playing around with it.

Not sure whether this is a known thing or if it's on purpose, but with r25811-100504, the scroll wheel light flickers while building the database. Default settings on everything except the "Wheel Light Timeout" is set to "Off".

It's actually kind of nice if it's on purpose, but if it's not, what else is it doing?

bilditup1:
I just tried 25811, and still have SD problems: hangs at boot, and doesn't load SD if inserted after booth, this is for several different values for udelay()/sleep(). Reverted to 25791 for now.

-e

Jennifur:

--- Quote from: bilditup1 on May 04, 2010, 04:12:08 PM ---I just tried 25811, and still have SD problems: hangs at boot, and doesn't load SD if inserted after booth, this is for several different values for udelay()/sleep(). Reverted to 25791 for now.

-e


--- End quote ---

I'm also still experiencing this. Anything else that could cause this?

FlynDice:
@Those having uSD problems:

Would you please check that your file system is not damaged by running either chkdisk or fsck depending on your OS.
If you still have the same symptoms please post the following info;

* Card Manufacturer
* Card Capacity
* Card Speed Class(2,4,6 usually has a small circle around it on your card)

I was actually having the problem where boot hangs if the uSD card is present but running fsck cleared that up.  And yes the card worked just fine in the OF.

Thanks!

MasterFen:
Do you think we could reinstate the Clip+ port as an unstable port, rather than an unusable one?

Navigation

[0] Message Index

[#] Next page

[*] Previous page