Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
ssorgatem:
--- Quote from: funman on March 27, 2010, 11:01:06 PM ---EDIT: backlight brightness fixed, bootloader updated
EDIT2: this means you shouldn't follow these directions
Looking for fuzev2 testers, the LCD started working today
There seems to be 2 different LCD types, at least me and kugel have the same type, so I would like to know if other people have the (hypothetical) other type of LCD on their fuzev2.
To test:
* download this patched OF version 2.3.31 and a current build
* unzip both archives on the root of the fuzev2
* unmount/eject and disconnect: firmware update starts, player powers down itself
* Keep pressing Left and power on : OF start (it'll work as before, you can shut it down at this point)
* Power on without touching left : you should see the rockbox bootloader and then the rockbox menu
* Since buttons do not work yet, you must force a power off by keeping power button pressed for ~20 seconds
If your fuzev2 doesn't display anything when booting rockbox code, power it off by keeping power pressed for ~20 seconds, then power it with left key pressed to boot the OF and update with an unmodified OF.
Then come to us on the forum or irc so we can try custom code on your player
--- End quote ---
this is not working for me. I must have done something wrong, but when I install the patched OF, everything goes as if it were an unmodified OF. And this happens to me not only with that file, but with every other firmware version i've tried to patch with mkamsboot. I've double-checked i'm using the correct (patched) firmware file and not the original, but my v2 fuze just seems to ignore the RB bootloader.
What amb I missing/doing wrong? I even tried patching with bootloader compiled with arm-elf and arm-elf-eabi chainloads, just in case it made any difference, but without results.
May the problem be that i have the other (hypothetical) LCD type?
saratoga:
Are you booting with the USB plugged in?
ssorgatem:
--- Quote from: saratoga on April 12, 2010, 03:02:26 AM ---Are you booting with the USB plugged in?
--- End quote ---
No, I disconnect it from the usb, then upgrade begins, finishes and it powers off. Then I power it on, it shows the splash screen, then database refresh, then language ®ion selection. Rebooting doesn't show up anything different from OF.
wildmetal:
The builds from 12/04 and 11/04 after some time of playback crashes.
I'm using the build from 09/04 because the palyback in this one works fine.
I can search especific bugs if you tell me witch ones to look for.
cumps
ssorgatem:
I've tried patching latest OF with both mkamsboot and bootloader compiled from subversion, without succes.
My v2 fuze won't even try to boot rockbox, just as if the firmware weren't patched.
Any ideas?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version