Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
smartboyathome:
You probably know about this, but I thought I would mention it anyway. I was playing around with a build I checked out last night on my Fuze v2 and found that with some of the applications (especially some games and demos) you get flickering and some of the colors get distorted. In addition, it seems that you can't exit the chess game unless you completely reboot the device. I'll try to build a new build today and see if I can find any more bugs in it, so far great job guys! :D
EDIT: After more testing, doom doesn't work giving error "Undefined instruction at 30134348" (I wasn't expecting it to work, just testing), and the text editor completely crashes the player with a black screen.
wildmetal:
Greetings!
I have tried the build from 10/04 and it gives me a white screen when entering in rockbox.
I'm using the from 09/04 and the playback works well, i have tried the game doom but it doesn't work.
I can play bubbles while listening to music but the screen flickers at the botton and this game exit fine with out any problem.
funman:
Some plugins leave me with a black screen when I exit them (Tested on the Clipv2/Clip+/Fuzev2), but keys still work (I can power off fine).
For example: chopper, demistify
I commented out backlight_use_settings() in chopper.c and now it works fine.
backlight_use_settings just reset the timeout to the global_settings value, so it seems to load the value 0 for global_settings.backlight_timeout (0 = never enable the backlight).
Shouldn't global_settings.backlight_timeout be filled with the default value (index=3, timeout = 10sec), or whatever is in the config.cfg file I have ?
I couldn't see where global settings are set to the default values (if they are at all), also I thought it's weird that firmware/backlight.c::lcd_sleep_timeout_value[] is not static (perhaps it was previously used by other files ?).
Can someone put some light over this ?
Xanikseo:
Using the current build on the Fuzev2, I notice the screen only flickers and shows distortions when a larger than small amount of what's on the screen changes, for example when you scroll quickly, or view the fire demo. When only small sections of the screen change and slowly, like when you scroll slowly within one page of a playlist, this doesn't occur.
EDIT: Flickering is unlikely when no music is playing. Can scroll very quickly with no flickering. When playing music, using the scroll wheel at the bottom of a playlist, where there is no movement, does cause flickering. Well I suppose it's just down to how much the chip is working, more work = more flickering.
Also, I think you may already be aware of this, but you can't reduce the volume very much. Anything lower than -39db has no effect on the volume.
tofmin:
Sansa c240 v2.
Every build above 25508 crashing. Can't access to database, setings. Can't skip next/prev song. Don't works cuesheets support... Something wrong happend :(
BTW. Where I can download old b25508?
Sorry 4 bad english
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version