Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
sierra2kilo:
I'm having trouble getting it working on my clipv2. The bootloader installs and boots fine, but it doesn't want to load the patched firmware (and I've tried patching and loading it twice), due to the checksum not matching.
It's supposed to be this: 2A4F256
But it's getting this: SA4F26A
Length is 6BDC0, if that's helpful, and I used 2.01.32.
Any ideas?
Thanks!
funman:
Download current build and unzip it on the player
sierra2kilo:
--- Quote from: funman on April 01, 2010, 01:49:43 PM ---Download current build and unzip it on the player
--- End quote ---
Now I'm getting a mismatch of -255 and -269.
???
kaps:
--- Quote from: funman on March 27, 2010, 11:01:06 PM ---EDIT: backlight brightness fixed, bootloader updated
Looking for fuzev2 testers, the LCD started working today
There seems to be 2 different LCD types, at least me and kugel have the same type, so I would like to know if other people have the (hypothetical) other type of LCD on their fuzev2.
To test:
* download this patched OF version 2.3.31 and a current build
* unzip both archives on the root of the fuzev2
* unmount/eject and disconnect: firmware update starts, player powers down itself
* Keep pressing Left and power on : OF start (it'll work as before, you can shut it down at this point)
* Power on without touching left : you should see the rockbox bootloader and then the rockbox menu
* Since buttons do not work yet, you must force a power off by keeping power button pressed for ~20 seconds
If your fuzev2 doesn't display anything when booting rockbox code, power it off by keeping power pressed for ~20 seconds, then power it with left key pressed to boot the OF and update with an unmodified OF.
Then come to us on the forum or irc so we can try custom code on your player
--- End quote ---
Just booted both OF and Rockbox perfectly fine. Was able to browse all menus on Rockbox, play music, skip, pause, etc. Powered off easily. I'm willing to help with whatever testing needed.
kugel.:
--- Quote from: luca on March 31, 2010, 09:22:35 AM ---My FuzeV2 is working really well ;D I put some music on the uSD and it has been playing for more than half an hour with absolutely no glitches. The only thing I could notice is that the clock is offset by a constant: at 14:41 local time, it showed 05:10, but I've no idea of whether RB was using 12-hrs or 24-hrs mode for display. The offset is constant since at 15:24 it shows 05:53, the difference (about 9hrs 31mins) is the same.
Congratulations for the great work :)
--- End quote ---
I might add that there's the possibility of losing the DRM-capabilities of the OF when you set correct time for the time. We had this on the v1 devices IIRC.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version