Rockbox Development > New Ports

SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2

<< < (271/386) > >>

tessarakt:
I installed rockbox on an e200v2 yesterday. Works fine, except for a very high energy consumption. I could not find anything on the Wiki page, so I am asking here: Is this known? Do you have an idea as to the reason? Anything I can do as a layman?

Cheers,

Jens

saratoga:
http://www.rockbox.org/wiki/SansaRuntime

BlueHazzard:
Hallo,
i just updated my sansa e250v2 to the actual rev r24195. Now i get a lot of *Panic* always i made something on the sd card.

The error:
"*PANIC*
SD Xfer read err:0x8 Disk1"

my SD Card: kingston 4GB microSD HC
in the rb disk info is written that the speed is 50MBit/s

thanks

FlynDice:
@BlueHazzard

Do you have another card to try?  That error is a data timeout while trying to read from the uSD card, I would suggest running chkdsk or fsck on your uSD card to see if the filesystem is damaged.  There aren't any recent changes to the SD driver that I can pin that on.  If you can see that the speed is 50MBit/s I'm guessing that the card initializes alright and you're getting the panics while playing or trying to play?

TimNixon:
Congrats to the team, especially for fixing the mpeg playback.
Probably not the right place to ask, but I see the remaining needs as USB support, and perhaps enabling line-out on the griffin dock.
Is there any action planned on these items? I know there's a thread about the griffin docks lineout (http://forums.rockbox.org/index.php?topic=22942.0)

Thanks again

Navigation

[0] Message Index

[#] Next page

[*] Previous page