Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
FlynDice:
Well, you can't download it you would need to build it.
You said you tried chkdsk, did you also try formatting?
EDIT:
RE: MCLK for internal SD = IDECLK
I believe I've proved this hypothesis wrong now or at least not completely correct. While trying to change the references to CGU_NAF_CLOCK_ENABLE to IDE_CLK_ENABLE I found that the MCI_CLOCK register(MCI_NAND on p2 of View HW info) was not being disabled(ie 0x00000000) while there was no disk access. I think I was lucky and the CGU_NAF_CLOCK_ENABLE is enabled in the bootloader so when I took out the references to it I just kept it from being shut down during sd_enable(false). This seems to confirm that MCLK does indeed come from PCLK for the internal disk also.
I will revert r23350 shortly as that assumes IDECLK is used as MCLK for the internal disk..
NaFIann:
Hi, I don't know if this is the right place, but I just wanted to inform you guys that there is a new OF for sansa fuze out in the wild, that mkamsboot doesn't want to work with.
(link)
Also, thanks for all the hard work - I am installing rockbox on my V1 fuze now (was a big fan of it on my V1 e270) and going to give it a test run. I'll post my findings here :)
[edit]
Preliminary findings:
- also having problems with a horizontal line right underneath the status bar in the main menu 'flickers'; it sometimes turns to black or some colour.
- a few lines of pixels at the top of the screen are eclipsed by some of the lacquer when you look straight at the screen. This is not really the fault of rockbox itself, but does present a ui problem: if you leave it to theme developers to workaround, some of the plugins (games for example) will have a few 'hidden' pixels, but the only other obvious fix is to have some pixels on always off and pretend the screen is smaller than it really is. I don't have a good solution to this, but just thought i'd throw it in the group here.
All else: music playback, sd card, fm tuner, scrollwheel etc. work fine for me so far.
funman:
Hi,
We don't plan to make new releases of mkamsboot for every new OF release, so mkamsboot 1.1 will reject Fuze OF *.28, you'll have to wait for the next release.
Alternatively you can build mkamsboot from SVN (this OF has been tested and its checksums committed), or wait the next release of the rockbox utility (which will accept this Fuze OF), or use *.26 version or older.
About the missing pixels, this can change between different models because of bad case design : I can see all the pixels on my own Fuze, but previous Fuzes I had exhibited this problem.
OldOne:
Hello,
My experience with recent releases concering sdhc card.
I have a E260v2 with a PQI 8gb microSDHC card that has worked very well with most versions until about 091016. After that my microSDHC card will not read properly. I have tried 091027 along with several in between and it still does not read sdhc properly. Reverting to the 091012(newest that I have that works) version works fine.
The PQI brand class 6 sdhc card has seemed to work better than a previous A-Data card although it also works fine with the 091012 version.
funman:
can you define "not read properly" ?
have you tried formatting the card ?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version