Rockbox Development > New Ports
SanDisk Sansa c200v2, m200v4, clipv1, clipv2, clip+, and fuzev2
funman:
I used a bit my Fuze with the class 6 Transcend SDHC without problems.
Do any of you have a problem to report about storage with a current build ?
The release candidates builds of mkamsboot had no bug report so they work fine, the code changed a bit since then but there were no functional changes so we can rebuild it and label it 1.1 final.
I will have a look again at recording (fs#10371)
There are some patches floating around where you could help:
* fixing playback on clipv1/m200v4/c200v2 which is being worked on by saratoga
* factorizing DBOP access for LCD/buttons reading, which needs some work on Fuze (hold button doesn't work anymore)
One more thing is needed for Fuzev1/e200v2 : finish the manual (AlexP started working on it, I'm not sure if there he opened a patch on the tracker yet)
My opinion is that once the manual is finished we can label Fuzev1 and e200v2 as stable.
HankB:
--- Quote from: mc2739 on October 02, 2009, 12:01:31 PM ---Any issues with the Fuze and e200v2 should be reported on the Flyspray tracker.
--- End quote ---
Where can I find guidelines for doing this in a manner that will be most useful to the devs?
I just decided that I would be more helpful if I kept a recent release loaded on my Fuze and reported any difficulties I encounter rather than try to find the most stable one and let others test the bleeding edge.
I just loaded r22777-090921 and believe I provoked a deadlock by inserting a microSD card and going to Rockbox -> Files. The player became unresponsive to further input except to bring the screen back after it turned off. I was able to power down after holding the power slider to "off" an extended time.
I just checked the bug tracker and searching for Fuze, only found one entry.
Thanks again for all of the effort you folks put into this.
best,
hank
Edit: found guidelines at http://www.rockbox.org/wiki/FlySprayHowto
But I am unable to reproduce the problem. :(
funman:
--- Quote from: HankB on October 05, 2009, 12:42:24 PM ---I just loaded r22777-090921
--- End quote ---
You shouldn't report any issues with an outdated build, always use the current build (available from the left menu on the website)
kugel.:
I posted a patch to http://www.rockbox.org/tracker/task/10667. tell me if it improves things please (most importantly on the e200v2).
FlynDice:
I just posted FS#10669 to try to implement voltage scaling once again. I made the assumption that the problem remaining with the previous implementation was a microsd card issue but I would also be interested how it performs on the clip as there were some bug reports on that last time. I have purposely set the reduced voltage on the low side to coax the bugs out if they are there... Feedback on Flyspray appreciated!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version