Thank You for your continued support and contributions!
after some investigation I found the problem .... I'll upload a new bootloader soon.
By the way, forgot to mention it: Rockbox currently doesn't charge over USB, so use the recovery mode to recharge.
Yes, this thread is the best place to report issues during the "hot" development phase
Data abort at 6005F4DCFSR 0x8(domain 0, fault 8)address 0xBC5A8FEBpc:6005F4DC sp:600B3960 A: 6005EFEC A: 60014714 A: 60014E3Cbt end
@Chrisjj: can you try to entirely remove the .rockbox directory and do a fresh install ?
Also make sure you use the default theme (cabbie) when reporting bugs
Which existing manual is most accurate for the Creative ZEN (which AFAICT does not yet have a manual)?I've tried e.g. http://download.rockbox.org/daily/manual/rockbox-sansae200v2/rockbox-buildch3.html#x5-240003 but it refers to items with names such as PLAYLIST (menu) and VIEW CURRENT PLAYLIST (command) which do not appear in the Creative ZEN version.
Generally speaking, that isn't going to work. Or work well at least.
I am going to do a push in the near future and look for discrepancies or failings in the documentation
Issue 2 - Original Firmware fails to runConditions: Hardware model is ZEN 8Gb; hardware unit is Chris's unit "G"; Boot version is V1Beta; Rockbox version is b170c73-1311101) With device off, hold Back button and press and release Power button - to power on using Original Firmware as per http://www.rockbox.org/wiki/CreativeZENPort : "The bootloader will boot the OF if back button is hold while powering up."Observed: CREATIVE logo, then ZEN logo, then page showing exclamation icon and text "Firmware problem". Device is non-responsive to all buttons, requiring paper-clip reset.
Did you reformat it for the Creative file system?
Issue 1 - On Now Playing (a.k.a. WPS), Select can cause crash.* The file set is here
Page created in 0.041 seconds with 17 queries.