Installation / Removal > Sandisk - Installation/Removal

e200rpatcher

<< < (2/2)

udawggy:
Which of you is right? Jdgordon or Linuxstb?

I got the e200rpatcher thing to work fine, which then told me to go to the next step (which didn't work):
  Bootloader installation from Mac OS X

\ Attach your player to your Mac and wait for its icon to appear in Finder.
   Open up Disk Utility (in Applications → Utilities) and click on the name of your player (e.g. Sansa e280)       in the list on the left pane. Then click on the “unmount” icon at the top.
    Warning: Do not click on the “eject” icon.

Download and open sansa.dmg from http://download.rockbox.org/bootloader/sandisk-sansa/sansapatcher/macosx/sansapatcher.dmg and then double-click on the sansapatcher icon inside.
If all has gone well, you should see some information displayed about your player and a message asking you if you wish to install the Rockbox bootloader. Press i followed by ENTER, and sansapatcher will now install the bootloader. After a short time you should see the message “[INFO] Bootloader installed successfully.” Press ENTER again to exit sansapatcher and then quit the Terminal application.

it's this sansapatcher thing that doesnt seem to work. The result is:
sansapatcher v0.6 with v4.0 bootloaders - (C) Dave Chapman 2006-2007
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

[INFO] Scanning disk devices...
[ERR]  No E200s or C200s found, aborting
[ERR]  Please connect your sansa and ensure it is in UMS mode
[ERR]  Also ensure that your Sansa's main partition is not mounted.
[ERR]  Please refer to the Rockbox manual if you continue to have problems.

Press ENTER to exit sansapatcher :

I've even then tried the rbutilqt graphical interface to no avail! It will install rockbox, but not the bootloader. I've tried everything! Is there something I can drag over manually to get this bootloader thing on there? Thanks
-Uriah
OSX, sansa e250r

JdGordon:
linuxtstb is correct.. i was confused

udawggy:
Thanks for the clarification. Any insight on what how I can get this 2nd bootloader step to work? Thanks in advance if so!
-U

Navigation

[0] Message Index

[*] Previous page