Installation / Removal > Sandisk - Installation/Removal

dual boot to rhapsody firmware

<< < (16/27) > >>

alaron:
Hey xoring,

Thanks for making that clear :) I'll update the code to date and build a bootloader and it should dual-boot properly and have that pixel corruption you were talking about fixed.

xoring:
Update: I now have a fully working pp5022.mi4 that fixes the pixel corruption.

svn up -r 14423 rockbox/
svn up -r 14620 rockbox/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c

I posted the file at the same place as the previous one.

ftp://wisard.no-ip.com/pp5022.mi4

Bagder:
Hey, |Rain| showed up on IRC (http://www.rockbox.org/irc/reader.pl?date=20070927#23:01:47) and provided a patch that might work. It basically disables the microsd card (and doesn't start a thread) for the bootoader:

http://pastebin.ca/718278

(I don't think it has been posted to flyspray just yet)

It would be great if you could try this on a fresh SVN checkout on an e200R player.

xoring:
Bagder: I just tried out that patch (svn up && patch -p0 < booloader.patch). I didn't get any errors when I patched or compiled, but the resulting bootloader causes my e200R to freeze on the first SanDisk logo-screen. It doesn't load either firmware.  

alaron:
Hi guys

I can confirm that neither the bootloader build from HEAD or the one patched worked, both froze at the Sandisk screen. So it's not the patch who's freezing, but the HEAD source.

I've tried Xoring's posted bootloader and works fine on mine, I can dualboot but I have 1 line of corruption on top of the screen. If we could fix that... :)

I think xoring's bootloader was built off an older code base...not the from HEAD, am I right?

ty

Navigation

[0] Message Index

[#] Next page

[*] Previous page