Installation / Removal > Sandisk - Installation/Removal

dual boot to rhapsody firmware

<< < (2/27) > >>

xoring:
I've had Rockbox working fine on my e280 for a while so when the instructions for the R series were released I tried it out on my brothers e270R. I went through all the instructions exactly and everything seemed to work fine. Rockbox now runs on his e270R with no problems. HOWEVER, when I try to boot the original (Rhapsody) firmware with Power + |

Bagder:
Not really, your description seems similar to that of at least one other R owner.

It might be due to minor hardware differences or it might just be that the rockbox bootloader needs to do something differently when it loads and runs the Rhapsody firmware image.

DavidGWRawson:
Im having that same problem too! Can you devs figure out how to fix this? Or do I have to just use recovery mode, update to rhapsody firmware, then use usb? Over and over? Or are you working on usb support for rockbox itself?

ROCKboxxUser:
Same here, I'm having the same problem on my E260R.  However, my player would slowly fade to white, then slowly to a completely black screen. I'm thinking there are probably minor hardware differences.

I've also tried both the mi4 firmware file in the instructions and with the latest mi4 from Sansa's site with the same result.

zwaldowski:
I'm getting the same problem, so I just stuck the Rhapsody firmware back on there.  We're so close!

Navigation

[0] Message Index

[#] Next page

[*] Previous page