WPS help please!

[karashata]

I recently made a WPS for the iRiver H10 20GB and iAudio X5, but I ran into a small problem with a couple of icons not showing up properly.  The rest of the WPS is working as I expected and wanted it to.  Below is the code for the .wps file:

Code: [Select]

%X|background.bmp|
%P|progbar.bmp|
%xl|A|batt1.bmp|128|104|
%xl|B|batt2.bmp|128|104|
%xl|C|batt3.bmp|128|104|
%xl|D|batt4.bmp|128|104|
%xl|E|batt5.bmp|128|104|
%xl|F|battcharge.bmp|128|104|
%xl|G|battplug.bmp|128|104|
%xl|H|hold.bmp|1|152|
%xl|I|hdd.bmp|1|144|
%xl|J|norepeat.bmp|48|104|
%xl|K|repeat.bmp|48|104|
%xl|L|repeat1.bmp|48|104|
%xl|M|repeatshuffle.bmp|48|104|
%xl|N|repeatab.bmp|48|104|
%xl|O|shuffle.bmp|24|104|
%xl|P|noshuffle.bmp|24|104|
%xl|Q|fastforward.bmp|72|104|
%xl|R|rewind.bmp|72|104|
%xl|S|play.bmp|72|104|
%xl|T|pause.bmp|72|104|
%xl|a|vol1.bmp|92|104|
%xl|b|vol2.bmp|92|104|
%xl|c|vol3.bmp|92|104|
%xl|d|vol4.bmp|92|104|
%xl|e|vol5.bmp|92|104|
%xl|f|vol6.bmp|92|104|
%xl|g|vol7.bmp|92|104|
%xl|h|vol8.bmp|92|104|
%xl|i|vol9.bmp|92|104|
%xl|j|vol10.bmp|92|104|
%xl|k|vol11.bmp|92|104|
%xl|l|vol12.bmp|92|104|
%xl|m|vol13.bmp|92|104|
%xl|n|vol14.bmp|92|104|
%wd

%al  Track %pp of %pe%ar%cl:%cM %cp  

%s%t10%al  %?ia;%s%t10%al  %?Ia
%s%t10%al  %?id;%s%t10%al  %?Ia
%s%t10%al  %?it;%s%t10%al  %?It

%pb|9|8|152|144
%al  %pc%ac%fbkbps %fc%ar-%pr  

%?bp<%?bc<%xdF|%xdG>|%?bl<%xdA|%xdB|%xdC|%xdD|%xdE>>
%?mp<%xdT|%xdS|%xdT|%xdQ|%xdR>
%?mm<%xdJ|%xdK|%xdL|%xdM|%xdN>
%?ps<%xdO|%xdP>
%?pv<|%xda|%xdb|%xdc|%xdd|%xde|%xdf|%xdg|%xdh|%xdi|%xdj|%xdk|%xdl|%xdm|%xdn>
%?mh<%xdH|>
%?lh<%xdI|>

If it's not entirely evident from the code, it's the HDD activity icon and the hold switch icon that aren't showing up.  Any help would be appreciated, and any suggestions to clean the rest up as well if possible would be great!

[jswetzen]

Maybe you have too many or too large images, resulting in some of them not loading. You could try to remove the volume meter (it has a lot of images) and see if the icons show up.

[Mikerman]

I'm not sure that it's the number of images, as I've used more than that, without any issue.

[jswetzen]

It's not the number of images but the combined size of all the images. If it's too big, some images won't be shown.

[Mikerman]

One further thought:  are your x and y coordinates for the 2 images within the screen size/are they reversed?

[kockroach]

I believe that they will work if you remove the pipe symbols "|" after the image tags.

Try using

Code: [Select]

%?mh<%xdH>
%?lh<%xdI>

[ell1ps1s]

I believe that they will work if you remove the pipe symbols "|" after the image tags.

Not if you want the conditionals to work correctly. (Or at all?)

Mikerman has the answer. The H10 20Gb's screen is 128x128, so coordinates of

Code: [Select]

%xl|H|hold.bmp|1|152|
%xl|I|hdd.bmp|1|144|

will indeed be off the screen.

[LambdaCalculus]

The H10 20Gb's screen is 128x128

The H10 20GB version is 160x128; the same as the iAUDIO X5. The H10 5/6GB version is 128x128.

[karashata]

I'll try a few things and see what happens, I'll post the results shortly.  Thanks for the suggestions.

**EDIT:  It doesn't seem to have made a difference, unfortunately.  I'll keep poking around with it and see if I can't make something work in the mean time, and if someone here stumbles across whatever is stopping those images from being displayed before I do then that'll save me a bit of frustration.

I looked at the WPS tags lists in the manual and the only one of those two that was shown was the hdd activity tag, and it's not even shown to be able to be used as a conditional.  The hold tag I had to dig up from another WPS I have.  Something else to note, the WPSes I'd looked at as guidlines to build my own worked perfectly including the hold and HDD icons, and I copied the lines to display my images exactly from what they had, only changing the images to be displayed to match my images.

[ell1ps1s]

The H10 20GB version is 160x128; the same as the iAUDIO X5. The H10 5/6GB version is 128x128.

Sorry--my mistake. Thanks for pointing that out.

The coordinates in question would be off the screen in either case.

[karashata]

I just noticed...  I did mix up my X and Y coordinates...  I have them displaying at (1,144) and (1,152) instead of (144,1) and (152,1)...  thanks for mentioning it again.