Installation / Removal > Apple - Installation/Removal

I've problem "No partition found. Insert USB cable and fix it."

(1/4) > >>

luisan1977:
Hello, my English is not too good and I hope to explain itself.
I have installed rockbox to my ipod nano of 4GB as it says the manual of rockbox, but when starting it leaves the screen rockbox and soon partition jumps east message of error “Not found. Insert USB cable and fix it.”
I have format in fat 32 my iopd nano.
that it is what I make bad?
to help me please?
thanks

LambdaCalculus:
*sticks Babelfish into ear*

Your iPod nano is supposed to be formatted as FAT32, so that's okay.

But you need to tell us if you're trying this with a 1st Generation nano or a 2nd Generation nano.

If your nano looks something like this:
http://upload.wikimedia.org/wikipedia/en/4/40/KoolgiyBlackNano.JPG

Then Rockbox will work.

If it looks like this:
http://upload.wikimedia.org/wikipedia/en/b/b2/Nano_omores.jpg

Then Rockbox will not work.

But I'm betting it's a 1st Generation. Can you tell us what revision you're using? There is a string of numbers that starts with an r when Rockbox starts up. Can you read them and tell us what the numbers are?

luisan1977:
Hello again.

My ipod is of first generation, is the same one that the photo first, black ahead and silver behind.

the numbers that appear when initiating rockbox are these:

to see. r14367-070816

after appearing this to the 7 or 8 seconds the message jumps of: “Not partition found. Insert USB cable and fix it.”

thanks for the aid.

to pardon by my English

LambdaCalculus:
I'm really going out on a limb here, but try to restore your iPod in iTunes, then reinstall Rockbox according to the manual.

Is your computer running Windows or Linux? Or do you have a Macintosh?

luisan1977:
 have recovered my ipod with itunes, have proven four versions different from iopd nano software, the 1,0, the 1,1, 1,2 and the 1.3.1.

my computer has the operating system Windows.

Navigation

[0] Message Index

[#] Next page