Installation / Removal > Iriver - Installation/Removal/Flashing

iRiver H320 Booting with Rockbox

(1/2) > >>

qwazi:
After modifying 1.29k and flashing it (with all the rockbox files located on the player), my H320 will no longer boot.  If I press the reset button and then press on, it comes up, but I don't want to always have to have a pin on hand to turn on my player.  I can go back to the old firmware if needed, so Rockbox has in no way permanently damaged my player, but I'd really like to have a working version of Rockbox on my player without requiring me to reset the iRiver whenever I want to use it.

bluebrother:
This sounds like a hardware issue, unfortunately.

qwazi:
That was the conclusion I came to when I tried Rockbox earlier.  Oh well.  It does seem somewhat odd that the iRiver firmware has no such trouble booting.

bluebrother:
That sounds strange. If it's a hardware issue you should experience it using the Iriver firmware too -- have you tried flashing the old firmware back? And if you did, do you have the same issue? Turning on the player itself is not a Rockbox issue as that is controlled by hardware. IIRC there was a similar issue here some time ago, you might want to search for it.

qwazi:
I was the one with that issue before.  I was unable to resolve it.  It seems that I just have an H320 with a defect that doesn't manifest with the iriver firmware.

Navigation

[0] Message Index

[#] Next page