Rockbox Development > New Ports
Cowon D2
tails_:
Hi. I have 8GB D2+ and have 2 small issues:
1. Charger status is always absent
2. touchscreen problem:
then you touch screen near edges it detects touch first in that place and then upper\lefter\downer\righter for about 15-30 pixels
P.S. Is USB mode still being developed?
motorbit:
hi, i just updated my rb to r28368 because my old installationd coul not read from the memory disc rb was installed to after it started from that disc flawless.
anyway, i do have some nasty problems with the new verstion.
the most annoying one is related to volume controls.
with most tracks, volume control will work fine
with some tracks, volume controls are a bit disturbed, like with some sudden balance l/r and / or volume jumps.
with some tracks, volume +/- wont do anything. going to settings -> sound settings -> volume and changing the volume there will reliable make my touchscreen inresponsive so ill have to restart the player to fix this.
a second problem is, that sometimes when i try to start rb ill get an checksume missmatch error and rb shuts down immidiately.
in this cases, ill have to copy over a fresh rb install to fix it.
this problem occours often after i booted into the original fw and have had a database rebuild there.
Ton:
(I also posted this message in the iaudiophile forums, but have not found a solution yet)
Today, after not haven't used my Rockboxed D2+ for some time, I installed the latest version of Rockbox on the SD card. To my surprise however, every now and then my player doesn't boot properly. I see the Rockbox screen for a few seconds and then my screen turns bright and is frozen. I can only use the reset button then and start again. One time it does boot then, but another time I get the same problem. It is very randomly. I didn't have this problem before. Until the last time I used the player ( a few months ago) everything was o.k.
To exclude that it has to do with the SD card, I also tried another card but same problem.
When Rockbox does boot properly I see a short "flash" between the initial Rockbox screen and the final screen. I don't know if this is normal.
What could be wrong or what could I be doing wrong ?
FWIW, I have FW 3.13 installed.
Bazirker:
--- Quote from: Ton on November 01, 2010, 09:14:45 AM ---(I also posted this message in the iaudiophile forums, but have not found a solution yet)
Today, after not haven't used my Rockboxed D2+ for some time, I installed the latest version of Rockbox on the SD card. To my surprise however, every now and then my player doesn't boot properly. I see the Rockbox screen for a few seconds and then my screen turns bright and is frozen. I can only use the reset button then and start again. One time it does boot then, but another time I get the same problem. It is very randomly. I didn't have this problem before. Until the last time I used the player ( a few months ago) everything was o.k.
To exclude that it has to do with the SD card, I also tried another card but same problem.
When Rockbox does boot properly I see a short "flash" between the initial Rockbox screen and the final screen. I don't know if this is normal.
What could be wrong or what could I be doing wrong ?
FWIW, I have FW 3.13 installed.
--- End quote ---
I'm having a similar problem, where I had an older version for a long time with no trouble and the new release is breaking it. For me, it will sometimes boot correctly but other times will go from the rockbox bootup screen to a black (blank) screen and will stay frozen until it either decides to let me reboot it (also happens in a random period, sometimes is seconds, sometimes is never) or until I plug it into USB. I have an original D2 but it's running D2+ firmware 2.13. I am running rockbox from an SD card, but have been doing that for some time now with no problems.
mbk1969:
Guys, try this version http://www.megaupload.com/?d=41QHGF6S from shotofadds` post http://forums.rockbox.org/index.php?topic=10164.msg171379#msg171379
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version