Rockbox Development > New Ports
Cowon D2
funman:
this link seems to work (I got here through the revisions of the script)
shotofadds:
The IRAM change is now committed, although I wouldn't get too excited about it as it doesn't make a huge difference. Also committed this weekend was a patch from FS#11240 that extends the volume range down to -89dB.
mbk1969:
I got my nose in Wolfson WM8985 spec and became curious about fully customizable three analog ouputs of this chip. By default Rockbox disables not used outputs, right? And wich output is used in D2 - LOUT2/ROUT2 or LOUT1/ROUT1?
update: D2 with original firmware can play video with line audio signal through the pseudo-usb connector and I think that OUT3/OUT4 outputs are used for that. It can be checked with added advanced settings for enabling theese outputs (and with such cable)...
motorbit:
line out is a feature missed forever by some users.
albeit, personally i would not care to much. but i guess it might worth implying it if possible without to much work.
shotofadds:
It's been a long time since I looked at this. LOUT1/ROUT1 is definitely used for the headphone output, and I *think* LOUT2/ROUT2 is used for the audio portion of the TV-out cable. This could be wrong, of course, and even if correct there might need to be some extra logic to enable it.
The code currently assumes L/ROUT1 for headphones and L/ROUT2 for line:
http://svn.rockbox.org/viewvc.cgi/trunk/firmware/drivers/audio/wm8985.c?revision=26413&view=markup
but I don't have the appropriate cable(s) to test it.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version