Rockbox Development > New Ports

Cowon D2

<< < (111/194) > >>

3amsleep:
@outlawman

here is the patched rockbox build you asked for, it includes the alternative hold and touchscreen modes, just unzip to your D2 root and overwrite the old .rockbox folder.

http://rapidshare.com/files/196478306/rockbox.zip

enjoy =)

store88:
@mcuelenaere
How can I get Nand chip responds

"Unknown NAND: 0xEC 0xD5 0x14 0xB6 0x74"
Is this the responds you mean

isanggon:
store88,

How about try to download and use another version of patched firmware. May be There wasn't hardware change on D2.

As I know, all of the D2's hardware are made in korea. And rockbox works well on latest selled version of D2 :)

store88:
@isanggon

I only tried 2.57 and 2.59

In addtion, another guy in a chinese forum has the same error as mine.
He or she use 3.57 firmware

@all
I have no brave of taking apart of my D2
I'll try rebuild the source and patch my D2 firmware, but my D2 is in "low battery" status now

I add the following code in nand_id.c

--- Quote ---
                                              /* K9GAG08U0 */
    {0xD5, 0x14,             128,            8192,      2048,         64,          2,          3 },
--- End quote ---

maybe it will not work, but I will try later

and now the error is:
*PANIC*
bmp tag not present
The rockbox I used is the lastest version(February 11, 2009)

mcuelenaere:
store88:

You'll need to look for a datasheet for that specific NAND chip which specifies the needed information to add in nand_id.

The 'bmp tag not present' error is TCC-specific, and AFAIK only shotofadds can help you with that..

Navigation

[0] Message Index

[#] Next page

[*] Previous page