Rockbox Development > New Ports
Cowon D2
3amsleep:
@FranzD2
lol, I just realised I confused you two.
@buk
In my experience with electronics (way more than with coding) I learnt that those "come and go" problems are (really) often caused by wireless interference and heat, they cause the oscillators to vary, thus changing the FCPU; I would try to get the code to consider such oscillations with a nice calibration function.
store88:
my D2(2G) firmware version 2.59
download patch from
ftp://andiators.homeip.net/D2%20rockbox/2009.01.21%20rev19825/d2N_patched2.59.bin
follow the instruction from
ftp://andiators.homeip.net/D2%20rockbox/2009.01.21%20rev19825/How%20to%20install.txt
but it seems not work for me
The screen shows:
--- Quote ---*PANIC*
Unknown NAND: 0xEC 0xD5 0x14 0xB6 0x74
--- End quote ---
http://iaudiophile.net/forums/showthread.php?t=17854
And I try to use tcctool to patch
But get the same result
Any idea?
3amsleep:
@store88
2.59 is new ground for rockbox, so if you want to test rockbox on your d2, revert to 2.57 or 3.57 and install rockbox.
anyway, what D2 model do you own? (2gb/4gb/8gb/16gb...)
PS: if you had a SD card on, get it out and try anyways.
store88:
--- Quote from: 3amsleep on February 09, 2009, 10:31:21 PM ---@store88
2.59 is new ground for rockbox, so if you want to test rockbox on your d2, revert to 2.57 or 3.57 and install rockbox.
anyway, what D2 model do you own? (2gb/4gb/8gb/16gb...)
PS: if you had a SD card on, get it out and try anyways.
--- End quote ---
I have metioned my D2 model is 2G
and follow the instruction I had get my SD out
I will try again on 2.59 firmware
Thx
I recompiled the source, and rebuilt the patch
as a result, it cannot work on 2.59 firmware(2gb D2)
maybe I need to roll back 2.57
'cause I don't know How to make rockbox work with 2.59
vodi:
Hi!
What's the exact command you used for patching the firmware?
./mktcctool /path/to/D2_2.59/1/D2N.bin /path/to/bootloader.bin /path/to/patched/D2N.bin
should output a correct patched Firmware.
I use Rockbox on a 8GB D2 with 3.59, i don't think there is too much difference to 2.59.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version