Rockbox Development > New Ports
Meizu M6 "miniplayer"
paul356:
Thank you, saratoga. I mistake AND for ADD. So, you know why I am puzzled. Reading disassembly makes me dizzy. :-P
bertrik:
Hi paul356, nice to hear you're having some success with the m6sl.
In theory you should be able to run code from RAM just by modifying boot.lds (making everything go into RAM). This works for me for the Samsung YP-S3 (which seems identical to the m6sl with respect to bootloading). For the YP-S3 I also modified meizu_dfu to upload only the first image. Running and testing from RAM is actually easier than running and testing from flash because it takes less time to do one test run.
A major next step for the m6sl would be to get the display working. There is already some code for that (written for a S6D0154 LCD controller), but I don't think it's working yet. You could also try the code from the m6sp, the firmware seems to use some kind of autodetection for the display. My m6sp uses the driver for the unknown LCD controller, but there is also a driver (in the same file) for a S6D0139 controller which could be in the m6sl.
bitrat:
hi bertrik,here's what i found~m6's circuit diagram,it's a PDF document(but it's a little larrrrrrrge),i don't know whether it could do some help,good luck!
erdear:
Hi bertrik. Another circuit program. The program uploaded by bitrat maybe breaken. Thus, I upload this one, version M6 SP.
PS: Change the file name to "meizu M6 SP.part1.rar" and "meizu M6 SP.part1.rar", and decompress any file, you can get pdf document.
bertrik:
Thanks for the offer, but I already have the M6SP schematic.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version