Welcome to the Rockbox Technical Forums!
Although I suspect the buttons will not necessarily do what you imagine they will do! This is because the button mappings for the remote are all based on the standard h1xx remote which doesn't have a joystick.There needs to be some code that differentiates between remotes at runtime.There is a patch HERE that may do the trick if it is an H3xx remote....(I've never seen one so don't know)
Could you (or anyone else with the h300 lcd/nonlcd remotes) tell me what the buttons on the top and bottom are labelled?On the LCD version they must be source, bitrate, on/play, record, mode and stop i assume, as these are defined in the code but not on the front of the remote, but where exactly are these buttons? are they rockers or push in types or what?On the non-lcd type there must just be vol up/down somewhere (no stop button .... it's as bad as an Ipoo!).Does anyone know?
On that H300 LCD joystick remote, there's three jog-levers and the joystick (as well as the hold switch). There's probably more controls on it than the H100-series remote, which has just four jog levers and a Stop & Play button.
Quote from: adam917 on July 26, 2006, 02:59:29 PMOn that H300 LCD joystick remote, there's three jog-levers and the joystick (as well as the hold switch). There's probably more controls on it than the H100-series remote, which has just four jog levers and a Stop & Play button.Are you sure? I can only see 2 on the pic and there aren't enough buttons defined in the code for 3!Both the H1xx remote and the H3xx remote have 11 buttons defined which would tally with 3 jogs and 2 buttons (H1xx) or 2 jogs and 5 buttons (H3xx) (as there are 3 buttons per jog - unless you can't push in the H3xx ones).I really want to know how they are labelled...do you push the top jog in to play, or push the bottom jog left etc..
Tons and tons of pics HERE --> http://www.misticriver.net/photos/thumbnails.php?album=364I just got the two I ordered in the mail! They are perfect and they sort of work with my H-140.I know that these are meant for the H3xx series, but the socket is the same and both the remotes and the base units are so similar I'm sure it won't take that much to get it all working the way it should in Rockbox.Mmmm, PM me if you want to work something out.:-)
Page created in 0.214 seconds with 68 queries.