Rockbox Technical Forums

Installation / Removal => Manual Installation => Toshiba - Installation/Removal => Topic started by: Wibber on July 13, 2007, 08:17:49 AM

Title: Gigabeat X60 USB and/or Removal problem - fixed (maybe)
Post by: Wibber on July 13, 2007, 08:17:49 AM
I installed the lated build of RB on to my X60, firstly with the latest boot loader (which failed) and then the previous one. it installed 'ok' but when plugged into my pc it comes up as an unknown device.
I've been trying to figure out if there is a way to get it to boot back to the toshiba firmware (like I did when the loader failed) but can't figure out how (well not without usb support anyway!)

I am running A64 3000+/NF4/Vista if it helps any.


thanks for the help!

NEVER MIND!

a couple of hard reboots later and it seems to work for now!

edit: it only seems to work after a hard rest... so maybe not fixed?


Title: Re: Gigabeat X60 USB and/or Removal problem - fixed (maybe)
Post by: Phalangees on July 13, 2007, 10:29:55 AM
Try this bootloader: http://download.rockbox.org/bootloader/gigabeat/FWIMG01.DAT

And make sure your using a very recent build.