1
Other - Installation/Removal / Re: Surfans F20 "NAND open error"
« Last post by GraFfiX on Today at 07:22:54 PM »Ok, so the LCD configuration is in firmware/target/mips/ingenic_x1000/erosqnative/lcd-erosqnative.c. Vertical/horizontal flip is controlled by this command:Code: [Select]/* Set Address Mode */
LCD_INSTR_CMD, 0x36,
LCD_INSTR_DAT, 0xd8,
The data byte is what controls the orientation. Bit 7 = vertical flip, bit 6 = horizontal flip. The "inverted" build is just a horizontal flip, so 0xd8 becomes 0x98. Bit 3 is RGB/BGR order, so changing that may help fix the colors.
Another thing you can try is adding the "display invert on" command (0x21), assuming the default is non-inverted; maybe also try 0x20 "display invert off" just in case it defaults to on for some reason.Code: [Select]// vvv add this
LCD_INSTR_CMD, 0x21,
// ^^^
/* Exit Sleep */
LCD_INSTR_CMD, 0x11,
LCD_INSTR_UDELAY, 120000,
/* Display On */
LCD_INSTR_CMD, 0x29,
LCD_INSTR_UDELAY, 20000,
LCD_INSTR_END,
To stop the display from going to sleep you can comment out / remove the code in lcd_tgt_sleep(), the backlight will still turn off but the controller will keep running normally.
I don't remember if dconrad ever figured out what the display controller was... not that it would help since you could have a different one, but most of them support a similar command set (called MIPI DCS) and you can check eg. the ILI9341 datasheet for info.
Thanks! That worked beautifully. I set the address mode instr_dat to 0x98, and added instr_cmd 0x21 per your instructions, everything is displayed properly now. I haven't tested the sleep fix yet, but I will report back when I do.
2
Announcements / Re: Calling all translators...
« Last post by cereal_killer on Today at 03:47:02 PM »I'll have a look at the german translation this weekend. I hope this is soon enough. If someone go ahead, feel free.
3
Audio Playback, Database and Playlists / Database/Tagnavi: Possible to have “Songs never played”?
« Last post by rockboxswede on Today at 02:02:42 PM »Hi,
First and foremost - Thank you so much for the Rockbox project and all hard work and dedication that has made it possible. I have it running on my iPod and it works great!
I have (by guessing and luck) managed to change the tagnavi to give me some great “smart playlists”. I have tried countless of times to have a playlist with conditions are play count = 0 and rating = 0. But I have never succeeded.
Does anybody here have a playlist such as the one requested? Is it possible to do?
(I have one playlist with songs with play count greater than 0 and rating greater than 0 which works. But changing the “greater than lesser than” signs does not work.)
Thanks in advance!
First and foremost - Thank you so much for the Rockbox project and all hard work and dedication that has made it possible. I have it running on my iPod and it works great!
I have (by guessing and luck) managed to change the tagnavi to give me some great “smart playlists”. I have tried countless of times to have a playlist with conditions are play count = 0 and rating = 0. But I have never succeeded.
Does anybody here have a playlist such as the one requested? Is it possible to do?
(I have one playlist with songs with play count greater than 0 and rating greater than 0 which works. But changing the “greater than lesser than” signs does not work.)
Thanks in advance!
4
Announcements / Calling all translators...
« Last post by speachy on Today at 09:22:09 AM »We're trying to get ready for a major release, and as part of that, the more complete we can have our translations, the better!
As of this writing, we only have 12 translations with at least 90% coverage; of those about half are missing only a couple of strings. Not so coincidentally, translations with at least 90% coverage also get added to the daily voice file builds!
Meanwhile, about another dozen translations have around 80% coverage, and another dozen over 60%. Finally, seven more translations are in pretty bad shape.
Head over to https://translate.rockbox.org/ to see the current state of affairs, and to contribute changes to existing translations or even new ones.
Oh, to prevent duplicated effort, please post here (and/or in IRC) what you are working on.
The Rockbox Utility also needs updated translations, but we don't have a convenient mechanism to contribute those yet.
Thanks!
As of this writing, we only have 12 translations with at least 90% coverage; of those about half are missing only a couple of strings. Not so coincidentally, translations with at least 90% coverage also get added to the daily voice file builds!
Meanwhile, about another dozen translations have around 80% coverage, and another dozen over 60%. Finally, seven more translations are in pretty bad shape.
Head over to https://translate.rockbox.org/ to see the current state of affairs, and to contribute changes to existing translations or even new ones.
Oh, to prevent duplicated effort, please post here (and/or in IRC) what you are working on.
The Rockbox Utility also needs updated translations, but we don't have a convenient mechanism to contribute those yet.
Thanks!
5
New Ports / Re: Fiio X1
« Last post by Taxicletter on Today at 05:34:05 AM »I understand there's good mp3 players for the same price, but I have a Fiio X1 (second edition), so it would be nice to be able to use RockBox on that.
Does this answer mean that, although slowly, someone indeed is working on this port?
Does this answer mean that, although slowly, someone indeed is working on this port?
6
New Ports / Re: AIGO EROS Q / AIGO EROS K / IRULU Surfans F20 / AGPTek H3 / HIFI WALKER H2
« Last post by user1975 on Today at 12:21:12 AM »Someone could share a firmware update for the lastest version of HiFi Walker H2? Maybe is the 1.7. Thank you
7
Other - Installation/Removal / Re: Installing rockbox on HiFiMAN HM-603 Slim - boot hangs
« Last post by Infine on April 16, 2024, 01:27:23 PM »Quote
I read somewhere that it is possible to close the contacts on Samsung chip on inner plate and somwhen it could help, so I'll try to find out more about. Otherwise it seems that I have to find the donor or buy the whole player.
Read the link above. Apparently you need a special flasher, a set of relevant drivers (probably on some old version of windows) and shorting 2 pins on the memory chip. I don't have the flasher and the drivers unfortunately though.
8
Repairing and Upgrading Rockbox Capable Players / Re: iPod Mini 2G Dramatic difference in battery life
« Last post by iPodVT on April 16, 2024, 10:31:09 AM »Got it. Will do.
9
Repairing and Upgrading Rockbox Capable Players / Re: iPod Mini 2G Dramatic difference in battery life
« Last post by speachy on April 16, 2024, 10:29:09 AM »I have installed ab2af16c7c-240415 onto my 2nd Gen mini with CF->SD adapter. At the outset I'm seeing
SSD detected: yes
Power mgmt: unsupported
This is what I expected.
Should I first see how long it will run with the Apple firmware as a benchmark, and then run this test version of Rockbox? I figure I should do the Apple version first in case any corruption results from running the Rockbox version.
I'd expect battery life to not be so great with this, but the more important thing is to ensure there's no data corruption. copy files over to it, do a database update, generally abuse things.
10
Repairing and Upgrading Rockbox Capable Players / Re: iPod Mini 2G Dramatic difference in battery life
« Last post by iPodVT on April 16, 2024, 10:20:36 AM »I have installed ab2af16c7c-240415 onto my 2nd Gen mini with CF->SD adapter. At the outset I'm seeing
SSD detected: yes
Power mgmt: unsupported
I don't know what you mean by "the ssd detection sanity"
Should I first see how long it will run with the Apple firmware as a benchmark, and then run this test version of Rockbox? I figure I should do the Apple version first in case any corruption results from running the Rockbox version.
[edit: addition] Or at this point are you only/mainly interested in stability/robustness, not necessarily power efficiency and how it compares to the Apple firmware's power efficiency?
SSD detected: yes
Power mgmt: unsupported
I don't know what you mean by "the ssd detection sanity"
Should I first see how long it will run with the Apple firmware as a benchmark, and then run this test version of Rockbox? I figure I should do the Apple version first in case any corruption results from running the Rockbox version.
[edit: addition] Or at this point are you only/mainly interested in stability/robustness, not necessarily power efficiency and how it compares to the Apple firmware's power efficiency?