Rockbox Technical Forums
Installation / Removal => Manual Installation => Apple - Installation/Removal => Topic started by: skullgrinder on August 03, 2007, 11:21:12 AM
-
Hi. I'm very new to Rockox and I just installed it. And when I'm trying to play a MP3 the player frezzes and I get this message: Data abort
at 01F00034
Can someone help! Is anything wrong?
-
Please let us know:
1. Which bootloader version you are using. You can find this by holding the >>| button as the iPod boots; and
2. Which build you are using. You can find this under System --> Version. It will be a number that looks something like this: r14158-070803.
-
Problem solved. I downloaded a old build from 2007-07-26.
But thanks anyway :)
-
If the problem exists on a current build but not on the 26 July build, then it is not "solved." It just means that you have avoided it rather than answering questions that might help us to isolate and fix it.
-
Hello,
I have the same problem with my nano and yes the build from 2007-07-26 works great. Todays build does not. It crashes with a similar error as the topic starter when I try and play any song from the database: "Data abort at 01F0838A".
Going out of town in a moment but will be back in a week, will be happy to see if we can get this fixed together then.
Take Care,
Will
Update: Build 2007-07-27 kills it so yes 2007-07-26 is the last working build. 2007-07-27 build errors out with "Data abort at 01F02AAS" when trying to play a song from the database.
-
PLEASE use a revision number, rather than saying "today's build." Rockbox builds change many times over the course of a day. For example, as I write this, there have already been 9 source code changes today, which means that there have been nine builds available. I explained how to find the revision number in the second post in this thread.
-
Hi!
I have installed Rockbox today for the first time and have the same problem with my Nano.
f.e.: "Data abort at 01F02E9C" when I want to play a MP3 file
My build is r14230-070807
I use iPL Loader 2.4 and have also installed iPodLinux - don't know if this info is important.
---------
I have also got another problem with my iPod, I copied some music folders onto it and when I want to initalize a database it counts up to about 800 files although i copied only 264 files. It doesn't stop accordingly (at least I think so) because I have to press Start/Pause to end the process. When I reboot afterwards I sometimes get stuck in the Rockbox screen and if I delete the database file ony my iPod I can start Rockbox again normally, but of course there is no database anywhere. Sometimes, though, I get to the menu without being stuck.
The first time I tried to initialize a database ever I came to the commiting screen after initialization / rebooting and there was a "Panic! ... error" (I don't know the exact output). and afterwards there were some undeletable database files on my iPod.
P.S.: While writing I tested initializing a database once again and it counted to 9xx and said "Reboot now". I rebooted and it commited 8/8 databases but if i select database in the menu it says again that the database isn't ready.
-
I use iPL Loader 2 and have also installed iPodLinux - don't know if this info is important.
We do not provide support for Loader 2. Please try with the official bootloader and see if you can replicate your problem.
I have also got another problem with my iPod
This is off-topic for this thread. Please start a separate thread for this issue in an appropriate forum or search for a thread that addresses this issue and post there.
-
OK, thanks for your reply.
I have now reinstalled Rockbox with the Rockbox Bootloader and have the same problem(s).
"Data abort at ...".
I tried it a couple of times now and I just got into the player screen (i normally get only the error msg), but the music doesn't play.
I have to reboot when I try to play a song, the player doesn't react any more.
using ver. r14231-070807 now
edit: Sometimes I get the error "Undefined Instruction at .." (It appears to be for some specific songs only)
-
Please try the daily build from 26 July to see if your problem is the same as the one experienced by those who posted earlier in the thread:
http://download.rockbox.org/daily/ipodnano/rockbox-ipodnano-20070726.zip
-
yes it's working with that build
the database problem is gone too
-
I've done some checking, and it looks like this is a known issue:
http://www.rockbox.org/tracker/task/7510
Those of you who are affected by this problem can help by providing the following information in that bug report:
We need you to go into System->Debug->Disk Info and copy the following:
Model:
Firmware :
PIO modes:
Cycle times:
IORDY support:
IORDY disable:
-
I had the same issue playing FLAC files and mp3 files on my 1st gen nano.
The build I tried it on was r14308.
Here's my Debug Disk Info:
Model: SST55LD019K-45-C-MWE
Firmware: ADBA40KA
PIO modes: 0 1 2 3 4
Cycle times: 120ns/120ns
IORDY support: yes
IORDY disable: no
Cluster Size: 4096 bytes
-
What is the status of this issue?
I have ipod nano 1st gen
Running r15216-071019 version
and I get "data abort" message when playing an mp3 file.
My disk info :
model: SST5LD019K-45-C-MWE
Firmware: ADBA40KB
PIO modes: 0 1 2 3 4
Cycle times: 120ns/120ns
IORDY support: yes
IORDY disable: no
Cluster Size: 4096 bytes
July build (when this issue was not present) is not available any more is it?
Any suggestions?
thanks
Sveta
-
This is not really an installation issue. For those of you having issues as detailed in FS#7510 I hereby refer you to the existing forum thread:
http://forums.rockbox.org/index.php?topic=11504.0
Please continue discussion in that thread. :)