Rockbox Technical Forums
Installation / Removal => Rockbox Utility => Topic started by: Terra1961 on January 21, 2017, 07:57:16 AM
-
Have a iPod Classic V6 or 7, with the 160GB disk, that was now changed with an 480GB SSD.
After update to Rockbox ( Beta Version ) I get the following message.
Rockbox boot loader
Version: 29d4119-160707
Battery status ok: 3755 mV
ATA error: -2147483636
Hold MENU+SELECT to reboot
then SELECT+PLAY for disk mode
Did somone has an idea to fix them, as I want to change to Rockbox
regards,
Michael
-
The message comes from bootloader so actual rockbox version has nothing to do. Basically the disk is not recognized.
-
Thanks for Information.
Anything what I can do now.
-
Hi there,
any one has an Information what I can do now.
Thanks for help.
regards,
Michael
-
Anyone an idea, please.
regards,
Michael
-
As a general rule, if the HDD works on OF then probably it will work on RB, if the HDD is not detected by OF then probably it won't work on RB.
AFAIK the RB HDD driver is heavily based on OF driver, and it seems to work very well using original hard disks.
Problems with HDD could be:
- broken HDD
- HW issues, i.e. incorrect power voltage (~3.3V), power consumption too high (it is 1000mA IIRC)
- ATA features mismatch, i.e. unsupported DMA modes, physical sector size (?)...
- other configuration issues, i.e. the HDD needs some extra commands
Anyway, i would recommend to use HDD models that are already tested by other users.
If your HDD is not recognized by OF the probably there is nothing you can do at this moment. I will try to use the errorcode to get more info about your specific issue.
-
For whats its worth, or if anyone has this issue in the future:
I have had this error twice now... and every time it was because I dropped the ipod and the SD Card popped out of socket.
Simply opening it up and popping it back in solves the trick every time.