Rockbox Technical Forums
Trash => Archived Threads => Official Test Builds => Topic started by: ranma on June 11, 2010, 03:01:26 PM
-
http://tdiedrich.de/~ranma/rockbox-c200v2/bootloader-c200v2-v1.0.sansa
SHA1: 383900cbabded16e2bebb8f43fc85ebca5cdb332
(Built from svn r26782)
Tested as working on my C200v2. We would like owners of a C200v2 to test this to confirm its working on all HW revisions.
-
Hi,
Would love to test it for you. I am not a dev though (or previous tester) so I am no expert and might not be the person you are looking for.
I have dl the latest c200v2 rockbox build, but I don't know what to do with your sansa file. If you can direct me to a how-to that makes sense to a non-dev I might be able to assist.
Thanks,
Tedb
-
Just follow the install directions:
http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other
And use this bootloader.
-
Just follow the install directions:
http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other
And use this bootloader.
Thanks Saratoga, just created the .bin file with mkamsboot. Battery was low so I will need to charge first, will try tomorrow.
-
Just installed the bootloader + rockbox. Seems to be working fine, I can also access the sd card.
I have a refurbished C240 US model.
-
http://tdiedrich.de/~ranma/rockbox-c200v2/bootloader-c200v2-v1.0.sansa
SHA1: 383900cbabded16e2bebb8f43fc85ebca5cdb332
(Built from svn r26782)
Tested as working on my C200v2. We would like owners of a C200v2 to test this to confirm its working on all HW revisions.
Working on a 2Gb C250 refurb
Submodel
C200v2 variant 0
-
Not working on my C250 refurb
I get this error:
Loading firmware
Length: 8A764
Checksum: 371F356
Model name: e2v2
Loading rockbox.sansa
Sum: 371F359
Bad checksum
Dunno what my variant is?
-
Model name: e2v2
You installed an e200v2 build.
-
Whoops, you're right.
I installed the c200v2 build and it seems to be working great.
Thanks.
-
Just follow the install directions:
http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other
And use this bootloader.
Hi..
I need some help.. see I´m a total noob on this thing rockbox and I want it in my sansa I have a c250v2 but i dont understand the instructions that the site gave .. Everything is alright until: .. Usage (example for clip): ./mkamsboot m300a.bin bootloader-clip.sansa output.bin ........then it says that copy the ouput file to the root
but what file? i dont understand this part... then when this is done.. how do I install the rockbox build? that says in the last point, cause this is only the bootloader isn´t it?
Hope you can help me.
Greetings.
-
The first argument is the SanDisk firmware file, the second is the Rockbox bootloader and output.bin should be the output file.
-
I use the version-c2x0v2 rockbox-20100407-backlightpatch
compiled by ranma
this version on this site and that but now this?
and to update the bootloader?
eu uso a versão rockbox-c2x0v2-backlightpatch-20100407
copilada por ranma
esta versão que esta no site e mas atual que esta ?
e necessário atualizar o bootloader ?
-
Just follow the install directions:
http://www.rockbox.org/wiki/SansaAMS#Installation_for_Unusable_other
And use this bootloader.
-
I had downloaded the version
but not changed the bootloader have to update it too?
eu tinha baixado a versão
mas não alterei o bootloader tem que atualiza lo também ?
-
The file linked in the first post is a bootloader.
-
upgraded the bootloader but withdrew the option of dual boot?
and it has not even as I start the other?
atualiozei and the playlist * PANIC * stopped
atualizei o bootloader mas retirou a opção de dual boot?
e isso mesmo não tem como eu iniciar o outro os ?
atualiozei e o playlist *PANIC* parou
-
Thanks for providing the link for testing