Rockbox Technical Forums
Installation / Removal => Manual Installation => Sandisk - Installation/Removal => Topic started by: c84574 on March 10, 2012, 06:03:17 PM
-
Hi,everyone! ;D
The Rockbox (v1.2.13) >Uninstallation>Remove the bootloader keeps showing
Rockbox Utility can not uninstall the bootloader on this target. Try a normal firmware update to remove the bootloader.
What I did was.
- Format fuze+
- Download the firmware (http://mp3support.sandisk.com/firmware/fuzeplus/fuzeplus02.37.01.zip)
- Extract .sb file into fuze+ root directory
- Restart
Then it shows
Boot version: 1.0
arg=CAFEBABE addr=40000000
Loading firmware
File not found
Please help..
-
You have to actually boot into the Sandisk firmware, rockbox won't know what to do with the sandisk firmware update file.
-
How can I boot into the Sandisk firmware? Is this the hold the volume button and the power button?
EDIT1:
I manage to boot into fuze+ (by holding volume and power button) but the problem is, it's not updating the original firmware.
EDIT2:
I finally get it to work!
What I did.. (2nd time)
- turn off fuze+
- hold the volume down button, plug into computer (force MSC mode)
- Download the firmware
- Extract .sb file into fuze+ root directory
- turn off fuze+
- "Loading firmware File not found" shows up
- press volume down button (to boot sansa firmware)
- wait for the update to finish
Thanks to saratoga for the help! Greatly appreciate it! :'(
-
hi was a lovely piece and helpful but i spent hours unsuccessfully doing it again and again until i realized that the firmware you manually install has to be the same or later version as your current one or it won't won't won't work!!!!!!!!