Hi!
ok. thanks for your warnings. but do I really need to be afraid of burning my Iriver if im using a
setup like this:condenser mic -> Denecke Ps-2 (batterybox which supplies 48 v phantom) -> Denecke AD20 (AD converter/preamp) -> Iriver H120 (optical in)
the batterybox powers the mic and shouldnt go "backwards" towards the AD20 and finaly as well to the Iriver. Am I right???
Another setup Im going to use:(from this page: mic:
http://naiant.com/)
mic: MSH-1M -> powersupply: MHI High-impedance adaptor & power supply (3v) -> Denecke AD20 -> Iriver H120 (optical in)
Third setup possibility:mic: MSH-1M -> powersupply: MHI High-impedance adaptor & power supply (3v) -> Iriver H120 (line in)
Foruth setup possibility:mic: MSH-1M -> (3v) -> Iriver H120 (line in and will let the Iriver H120 power the mic with its 3.7 v)
Fith setup possibility:condenser mic -> Denecke Ps-2 (batterybox which supplies 48 v phantom) -> Iriver H120 (line in)
do I have to worry about frying my Iriver (or anything else) with any of these setups???
thanks for your help
/ Perik