Thank You for your continued support and contributions!
After several different struggles to get this working I finally managed to sort out the firmware by doing the above ... iy was a struggle ... but it is complete... and now working ... WTF!! this was a major pain ... as it's not clear what is hapening. What I can telll if you have V1.8 beta firmware, you need to do the downgrade above and then also follow the same procedure using the patched FW
COrrect me if I'm wrong here ... DSF files are NOT supposed to show in rockbox correct?
i am struggeling to get rockbox working on my agptek rocker, not t6, with stock fw 1.31 beta.first i copied over the rb fw, to see if it is already running due to a fw > 1.2 - no success.@milardo - next i tried what you suggested, but i'm also getting this v-v failed error, when updating to AGPTEK_Rocker_FW_(20181207).not sure if it is a more recent version than 1.31 beta - why dont they keep it consistent using fw numbers??so i took the steps that understorm described, downloaded latest AGPTEK_Rocker_FW_(20181207) and edit the version.txt to ver=2018-12-07T00:00:00+08:00repacked to update.upt, but still flashing halts with this error.boy, this is complicated :/
Did you try to downgrade firmware to like 1.2?
Quote from: Milardo on July 10, 2019, 10:50:58 AMDid you try to downgrade firmware to like 1.2?no (just upgrade?).anyone who can tell which date fw 1.31 beta has?
OK ... so now that Ive caught my breath and figured this out .... here's what I got ...If you have a rocker with the FW version 1.31 beta you need to downgrade it to v1.2 or the FW update to the rockbox dual boot firmware will not flash.1 - follow the instructions on the previous post from a linux terminal and change the version# in the txt file as described.2 - once that upgrade is complete. You more or less have to do the same thing with the rockbox patched FW 3 - Install .rockbox as normal.4 - You may be able to skip #1 altogether and just change the version number in the patched FW, I'm not sure ...now I'm working!COrrect me if I'm wrong here ... DSF files are NOT supposed to show in rockbox correct?
Did you try what this person tried?Quote from: coacharnold on July 07, 2019, 04:00:14 PMOK ... so now that Ive caught my breath and figured this out .... here's what I got ...If you have a rocker with the FW version 1.31 beta you need to downgrade it to v1.2 or the FW update to the rockbox dual boot firmware will not flash.1 - follow the instructions on the previous post from a linux terminal and change the version# in the txt file as described.2 - once that upgrade is complete. You more or less have to do the same thing with the rockbox patched FW 3 - Install .rockbox as normal.4 - You may be able to skip #1 altogether and just change the version number in the patched FW, I'm not sure ...now I'm working!COrrect me if I'm wrong here ... DSF files are NOT supposed to show in rockbox correct?unfortunately, it also fails to downgrade from 1.31 > 1.2 following these steps.
Is it possible to downgrade firmware just by updating just it normally? Without any of those extra steps?
Quote from: Milardo on July 10, 2019, 02:48:51 PMIs it possible to downgrade firmware just by updating just it normally? Without any of those extra steps?no, not possible.this is on an old sd card of mine, the only one i have atm. perhaps the sd card needs to be formated by the player and empty, so to get a fw update working properly?p.s. song playback works of course.
Yes, formatting the card might be a good idea
Quote from: Milardo on July 11, 2019, 12:06:06 PMYes, formatting the card might be a good ideathanks for trying to help me, but it does not change a thing. well, i was not expecting a huge difference though, as the card was perfectly recognized by the dap even before. vfat as before.attempts (both vanilla + edited fw):AGPTEK_Rocker firmware update(20181207)AGPTEK_Rocker_FW_(20171101)
Page created in 0.088 seconds with 22 queries.