Thank you for answering so quickly, but I have tried to do what you recommended and it's not working.
1. I used the rockbox utility
'device' then
'change'2. I selected the player (E:/) then clicked
'autodetect'3. The message
'Could not detect a mountpoint.
Select you mount point manually.'
4. So I picked the Sansa Fuze V2 (Stable) version.
5. Went into instillation tab, clicked
'install the bootloader'6. Now it said (roughly translated) that I needed a copy of the original Sandisk firmware (bin file) and that I needed to download this file myself.
7. I clicked on the links in this pop-up and downloaded a fuze02.03.33.zip file from
http://daniel.haxx.se/sansa/amsfw.html.
8. And there was the bin file. I put it on the player, then tryed the bootloader process again. Now it works, and I go to the
'install rockbox' under the installation tab and install rockbox the stable release. However I noted that it says that the latest stable release is 3.11.2 and I used the fuze.bin file for 2.03.33.
9. Now the .rockbox and the fuzepa.bin are on the player good it should work right?
10. I turn off the player, and turn it back on.
11. Now the rockbox screen comes up saying it is 'Boot Ver 2.0' but then...
12. All this comes up:
Loading Firmware:
Length: 9E398
Checksum: 3F4CF40
Model name: fuz2
Loading rockbox.sansa
Sum: 3F4CF27
13. Then
'Plug USB cable' on a black screen. When I plug in the cable it says 'Bootloader USB mode'
So what am I doing wrong? I though I just had the wrong .bin file for the version, but I downloaded the latest I could find. I just need to know exactly what I should do. :'(